BROKEN ARROW, OK —
OSHA Inspection: REFRACTORY ANCHORS, INC
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of REFRACTORY ANCHORS, INC in 9836 S. 219TH ST. E. AVE, BROKEN ARROW, OK 74014 (NAICS 327125). OSHA activity number 339807927.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- REFRACTORY ANCHORS, INC
- Site address
- 9836 S. 219TH ST. E. AVE
- City
- BROKEN ARROW
- State
- OK
- ZIP
- 74014
- Mailing
- 9836 S. 219TH ST. E. AVE, BROKEN ARROW, OK 74014
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 327125
- Employees
- 33
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.212 A01
- Issued
- Jul 29, 2014
- Abate by
- Aug 20, 2014
- Penalty
- Initial $4,410 · Current $2,646 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. This violation was observed on or about June 11, 2014, employees operating the wire straightener machines (3) were not protected from the rotating feed heads exposing employees to the hazards of being caught in the ingoing nip points of the heads.
Recent events (2)
- — I (S) $2646
- — Z (S) $4410
1910.212 A03 II
- Issued
- Jul 29, 2014
- Abate by
- Jan 19, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): The employer does not ensure point of operation guarding is place to protect employees from having any part of their body in the danger zone during operation. a) This violation was observed on or about June 11, 2014, the #1 Chicago press brake was not guarded exposing employees to the hazards of being caught in the machinery. b) This violation was observed on or about June 11, 2014, the #2 Chicago press brake point of operation was not guarded exposing employees to the hazards of being caught in the machinery. c) This violation was observed on or about June 11, 2014, the #3 Chicago press brake point of operation was not guarded exposing employees to the hazards of being caught in the machinery.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.217 C02 I A
- Issued
- Jul 29, 2014
- Abate by
- Aug 13, 2014
- Penalty
- Initial $3,150 · Current $1,890 Reduced
General-duty citation text
29 CFR 1910.217(c)(2)(i)(A): The point of operation guard did not prevent entry of hands or fingers into the point of operation by reaching through, over, under or around the guard; This violation was observed on or about June 11, 2014, the Bliss punch press point of operation was not guarded on the left or right sides exposing employees to the hazards of being caught in the die.
Recent events (2)
- — I (S) $1890
- — Z (S) $3150
1904.29 A
- Issued
- Jul 29, 2014
- Abate by
- Aug 20, 2014
- Penalty
- Initial $630 · Current $378 Reduced
General-duty citation text
29 CFR 1904.29(a): The employer did not use OSHA 300, 300-A, and 301 forms, or equivalent forms, for recordable injuries and illnesses. This violation occurred on or about June 11, 2014, Refractory Anchors, Inc did not maintain OSHA 300 Injury and Illness logs for 2014 during which recordable injuries occurred.
Recent events (2)
- — I (O) $378
- — Z (O) $630
More inspections at Refractory Anchors, INC
View Refractory Anchors, INC's full OSHA safety record →
More inspections in this industry (NAICS 327125)
More inspections in OK
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339807927.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.