DALLAS, TX —
OSHA Inspection: ATRIUM WINDOWS AND DOORS
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of ATRIUM WINDOWS AND DOORS in 9001 AMBASSADOR ROW, DALLAS, TX 75247 (NAICS 332321). OSHA activity number 339816993.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ATRIUM WINDOWS AND DOORS
- Site address
- 9001 AMBASSADOR ROW
- City
- DALLAS
- State
- TX
- ZIP
- 75247
- Mailing
- 9001 AMBASSADOR ROW, DALLAS, TX 75247
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332321
- Employees
- 450
- Ownership type
- A
Citations
8 citations on file for this inspection.
1910.147 C07 I
- Issued
- Dec 5, 2014
- Abate by
- Dec 17, 2014
- Penalty
- Initial $6,000 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(c)(7)(i): The employer did not provide training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees: The employer did not ensure that employees performing maintenance/repair work on machinery/equipment were trained. This violation occurred on June 12, 2014, at the 150/160 line; where at least one (1) employee, who was exposed to caught-between and crushed-by moving parts while repairing Hydraulic Operated Die #374, was not trained on Lockout/Tag-out procedures.
Recent events (2)
- — I (S) $0
- — Z (S) $6000
1910.147 D04 I
- Issued
- Dec 5, 2014
- Abate by
- Dec 17, 2014
- Penalty
- Initial $6,000 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(d)(4)(i): Lockout or tagout devices were not affixed to each energy isolating device by authorized employees: The employer did not ensure that lockout or tag-out devices were affixed to energy isolating device by authorized employees. This violation occurred on or about June 12, 2014, at the 150/160 line; where at least one (1) employee, who was repairing Hydraulic Operated Die #374, was not utilized lockout tag-out procedures.
Recent events (2)
- — I (S) $0
- — Z (S) $6000
1910.303 G02 I
- Issued
- Dec 5, 2014
- Abate by
- Dec 17, 2014
- Penalty
- Initial $5,000 · Current $1,600 Reduced
General-duty citation text
29 CFR 1910.303(g)(2)(i): Except as elsewhere required or permitted by Subpart S of Part 1910, live parts of electric equipment operating at 50 volts or more were not guarded against accidental contact by use of approved cabinets or other forms of approved enclosures: The employer did not ensure live parts of electric equipment operating at 50 volts or more were guarded against accidental contact by use of approved cabinets or other forms of approved enclosures. This violation was observed on or about June 19, 2014, in the assembly area; where a 480-volt electrical panel was missing front panel cover, exposing employees to energized parts.
Recent events (2)
- — I (O) $1600
- — Z (S) $5000
1926.25 A
- Issued
- Dec 5, 2014
- Abate by
- Dec 17, 2014
- Penalty
- Initial $4,000 · Current $2,000 Reduced
General-duty citation text
29 CFR 1926.25(a): During the course of construction, alteration, or repairs, debris was not kept cleared from work areas, passageways, and stairs, in and around buildings or other structures: This violation occurred on or about June 17, 2014, and at times after thereto, in the new office under construction; where debris, electrical junction boxes and nails accumulated in the work area, exposing at least two (2) employees to the tripping hazards and other serious injuries.
Recent events (2)
- — I (S) $2000
- — Z (S) $4000
1926.56 A
- Issued
- Dec 5, 2014
- Abate by
- Dec 17, 2014
- Penalty
- Initial $5,000 · Current $0 Reduced
General-duty citation text
29 CFR 1926.56(a): While work was in progress, construction areas, ramps, runways, corridors, offices, shops or storage areas were not lighted to the minimum illumination intensities as listed in Table D-3 of 29 CFR 1926.56: This violation occurred on or about June 17, 2014, and at times after thereto, in the new office under construction; where lights were not provided to the minimum illumination intensities, exposing at least two (2) employees to the hazards of tripping and falling.
Recent events (2)
- — I (S) $0
- — Z (S) $5000
1926.403 B02
- Issued
- Dec 5, 2014
- Abate by
- Dec 17, 2014
- Penalty
- Initial $4,000 · Current $2,000 Reduced
General-duty citation text
29 CFR 1926.403(b)(2): Listed, labeled, or certified equipment was not installed and used in accordance with instructions included in the listing, labeling, or certification: The employer did not ensure electrical equipment is used and installed in accordance with the listing or labeling instructions. This violation was observed on or about June 19, 2014, in the new office under construction; where a power strip was plugged into an extension cord powering 5-foot floor fan and battery charger.
Recent events (2)
- — I (S) $2000
- — Z (S) $4000
1926.404 F06
- Issued
- Dec 5, 2014
- Abate by
- Dec 17, 2014
- Penalty
- Initial $4,000 · Current $2,000 Reduced
General-duty citation text
29 CFR 1926.404(f)(6): The path to ground from circuits, equipment, or enclosures was not permanent and continuous: This violation was observed on or about June 19, 2014, in the new office under construction; where employees were exposed to electrical hazards while using extension cord that was not permanent and continuous.
Recent events (2)
- — I (S) $2000
- — Z (S) $4000
1926.405 G02 IV
- Issued
- Dec 5, 2014
- Abate by
- Dec 17, 2014
- Penalty
- Initial $4,000 · Current $2,000 Reduced
General-duty citation text
29 CFR 1926.405(g)(2)(iv): Flexible cords were not connected to devices and fittings so that strain relief is provided to prevent pull from being directly transmitted to joints or terminal screws: The employer did not ensure flexible cords were connected to devices and fittings so that tension was not transmitted to joints or terminal screws. This violation was observed on or about June 19, 2014, in the new office under construction; where the flexible cord connected to power strip powering 5-foot floor fan and battery charger did not have strain relief device causing a transmission of tension to joints and or terminals.
Recent events (2)
- — I (S) $2000
- — Z (S) $4000
More inspections at Atrium Windows and Doors
View Atrium Windows and Doors's full OSHA safety record →
More inspections in this industry (NAICS 332321)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339816993.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.