SOLON, OH ·
OSHA Inspection: SIGNUM, INC.
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of SIGNUM, INC. in 32000 AURORA ROAD, SOLON, OH 44139 (NAICS 337215). OSHA activity number 339823718.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SIGNUM, INC.
- Site address
- 32000 AURORA ROAD
- City
- SOLON
- State
- OH
- ZIP
- 44139
- Mailing
- 32000 AURORA ROAD, SOLON, OH 44139
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 337215
- Employees
- 120
- Ownership type
- Private (A)
Citations
5 citations on file for this inspection.
1910.134 C01
- Issued
- Jul 11, 2014
- Abate by
- Aug 15, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(c)(1): A written respiratory protection program that included the provisions in 1910.134(c)(1)(i) - (ix) with worksite specific procedures was not established and implemented for required respirator use: On or about June 5, 2014, employees were required to use respirators when they cut fiber/cement siding with a power saw. No written respirator program was developed for these employees.
Recent events (1)
- · Z (O) $0
1910.134 F01
- Issued
- Jul 11, 2014
- Abate by
- Aug 15, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(f)(1): The employer did not ensure that employee(s) required to use a tight-fitting facepiece respirator passed the appropriate qualitative fit test (QLFT) or quantitative fit test (QNFT): On or about June 5, 2014, employees were required to use half-mask P100 respirators, when they cut fiber/cement siding with a power saw. No fit test was done for these employees.
Recent events (1)
- · Z (O) $0
1910.134 E01
- Issued
- Jul 11, 2014
- Abate by
- Aug 15, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employees ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace: On or about June 5, 2014, employees were required to use half-mask P100 respirators, when they cut fiber/cement siding with a power saw. No medical evaluation was done for these employees to determine if they were medically able to wear a respirator.
Recent events (1)
- · Z (O) $0
1910.1200 G08
- Issued
- Jul 11, 2014
- Abate by
- Aug 15, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(g)(8): The employer did not maintain in the workplace copies of the required safety data sheets for each hazardous chemical, and shall ensure that they are readily accessible during each work shift to employees when they are in their work area: Employees in the saw room cut acrylic plastic, plywood and fiber/cement board. No data sheets were available on the site for these products which contain the hazardous chemicals, including but not limited to, acrylic polymer, wood, bonding resin, cement and fiberglass.
Recent events (1)
- · Z (O) $0
1910.1200 H03 II
- Issued
- Jul 11, 2014
- Abate by
- Aug 15, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(h)(3)(ii): Employee training did not include the physical, health, simple asphyxiation, combustible dust, and pyrophoric gas hazards, as well as hazards not otherwise classified, of the chemicals in the work area: Employees in the saw room cut acrylic plastic, plywood and fiber/cement board. No training was done on the site for these products which contain the hazardous chemicals, including but not limited to, acrylic polymer, wood, bonding resin, cement and fiberglass
Recent events (1)
- · Z (O) $0
More inspections at Signum, INC.
View Signum, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 337215)
More inspections in OH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 339823718.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.