Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: METROPOLITAN CONSTRUCTION SYSTEMS, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of METROPOLITAN CONSTRUCTION SYSTEMS, INC. in 1701 SUNRISE HIGHWAY OLIVE GARDEN SITE, BAY SHORE, NY 11706 (NAICS 238160). OSHA activity number 339831810.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Metropolitan Construction Systems, INC. — free Get an email when a new federal OSHA severe-injury report for Metropolitan Construction Systems, INC. is published. One employer, no account, unsubscribe in one click.
Site address
1701 SUNRISE HIGHWAY OLIVE GARDEN SITE
City
BAY SHORE
State
NY
ZIP
11706
Mailing
234 UNION AVENUE, HOLBROOK, NY 11741
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
A
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238160
Employees
4
Ownership type
A

3 citations on file for this inspection.

1926.300 B01

Serious Gravity 10 1 instance 1 exposed
Issued
Sep 29, 2014
Abate by
Oct 3, 2014
Penalty
Initial $5,390 · Current $3,500 Reduced
29 CFR 1926.300(b)(1): Power operated tool(s), designed to accommodate guards, were not equipped with such guards when in use:    (a) 1701 Sunrise Highway, Bay Shore, NY (Worksite) - An employee operated a DeWalt 4-1/2" Angle Grinder, Model # D28402 / Serial # 214750(9), to cut clay roofing tiles for installation, without the keyless adjustable guard affixed to the grinder on, or about June 27, 2014.      Note: In addition to abatement certification, the employer is also required to submit abatement documentation for this violation in accordance with 29 CFR 1903.19.
Recent events (3)
  • — F (S) $3500
  • — C (S) $5390
  • — Z (S) $5390

1926.453 B02 V

Serious Gravity 10 2 instances 2 exposed
Issued
Sep 29, 2014
Penalty
Initial $5,390 · Current $3,500 Reduced
29 CFR 1926.453(b)(2)(v): A body belt with lanyard attached to the boom or basket was not worn by employee(s) working from an aerial lift.    (a) Worksite, west side of building - Two employees installed clay tile roofing along the west side of the building at a height of 14'-7" while working from a JLG Articulating Boom Aerial Lift, Model # 400S / Serial # 0300134997, without fall protection on, or about June 27, 2014.    (b) Worksite, south side of building - Two employees installed clay tile roofing along the south side of the building at a heights ranging between 10'-6" and 21' while working from a JLG Articulating Boom Aerial Lift, Model # 400S / Serial # 0300134997, without fall protection on, or about June 27, 2014.      Note: Abatement for this violation was previously documented; therefore, the employer is not required to submit abatement certification or documentation for this violation in accordance with 29 CFR 1903.19.
Recent events (3)
  • — F (S) $3500
  • — C (S) $5390
  • — Z (S) $5390

1926.453 B02 VI

Serious Gravity 10 1 instance 2 exposed
Issued
Sep 29, 2014
Abate by
Oct 3, 2014
Penalty
Initial $5,390 · Current $3,500 Reduced
29 CFR 1926.453(b)(2)(vi): Boom and basket load limits specified by the manufacturer were exceeded:    (a) Worksite, west and south sides of the building - The maximum restricted basket capacity of 500 lbs. was exceeded by approximately 115 lbs. when the JLG Articulating Boom Aerial Lift, Model # 400S / Serial # 0300134997, was operated with the boom extended within the manufacturer's "restricted capacity" zone, at a distance of approximately 31'-7". The aerial lift's basket was occupied by two employees, clay roofing tiles, fasteners, and miscellaneous hand tools, which had an approximate combined weight of 615 lbs. on, or about June 27, 2014.      Note: In addition to abatement certification, the employer is required to submit abatement documentation for this violation in accordance with 29 CFR 1903.19.
Recent events (3)
  • — F (S) $3500
  • — C (S) $5390
  • — Z (S) $5390

View Metropolitan Construction Systems, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339831810.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.