Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: LUTTRELL ENGRAVING INC.

Complaint inspection · Health discipline

On , OSHA opened a complaint health inspection of LUTTRELL ENGRAVING INC. in 5000 W 128TH PL, ALSIP, IL 60803 (NAICS 323115). OSHA activity number 339831935.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Luttrell Engraving INC. — free Get an email when a new federal OSHA severe-injury report for Luttrell Engraving INC. is published. One employer, no account, unsubscribe in one click.
Site address
5000 W 128TH PL
City
ALSIP
State
IL
ZIP
60803
Mailing
5000 W 128TH PL, ALSIP, IL 60803
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
323115
Employees
21
Ownership type
A

6 citations on file for this inspection.

1926.1101 G01 I

Serious Gravity 1 1 instance 2 exposed
Issued
Jul 14, 2014
Abate by
Aug 28, 2014
Penalty
Initial $1,200 · Current $720 Reduced

Hazardous substances 9954

29 CFR 1926.1101(g)(1)(i): The employer shall use the following engineering controls and work practices in all operations covered by this section, regardless of the levels of exposure:     Vacuum cleaners equipped with HEPA filters to collect all debris and dust containing ACM and PACM, except as provided in paragraph (g)(8)(ii) of this section in the case of roofing material.    On or about June 23, 2014, in the facility, employee(s) required to remove asbestos-containing vinyl floor tiles in the graphic artist room were potentially exposed to the hazard of contact with chrysotile asbestos.  Vacuum cleaners equipped with HEPA filters were not used to collect debris and dust.
Recent events (2)
  • — I (S) $720
  • — Z (S) $1200

1926.1101 G01 II

Serious Gravity 1 1 instance 2 exposed
Issued
Jul 14, 2014
Abate by
Aug 28, 2014
Penalty
Initial $0 · Current $0

Hazardous substances 9954

29 CFR 1926.1101(g)(1)(ii): The employer shall use the following engineering controls and work practices in all operations covered by this section, regardless of the levels of exposure:   Wet methods, or wetting agents, to control employee exposures during asbestos handling, mixing, removal, cutting, application, and cleanup, except where employers demonstrate that the use of wet methods is infeasible due to for example, the creation of electrical hazards , equipment malfunction, and, in roofing, except as provided in paragraph (g)(8)(ii) of this section.  On or about June 23, 2014, in the facility, employee(s) required to replace asbestos-containing vinyl floor tiles in the artist room were potentially exposed to the hazard of contact with chrysotile asbestos.  Wet methods, or wetting agents, to control employee exposures were not used.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.1101 G01 III

Serious Gravity 1 1 instance 2 exposed
Issued
Jul 14, 2014
Abate by
Aug 28, 2014
Penalty
Initial $0 · Current $0

Hazardous substances 9954

29 CFR 1926.1101(g)(1)(iii): The employer shall use the following engineering controls and work practices in all operations covered by this section, regardless of the levels of exposure:   Prompt clean-up and disposal of wastes and debris contaminated with asbestos in leak-tight containers except in roofing operations, where the procedures specified in paragraph (g)(8)(ii) of this section apply.   On or about June 23, 2014, in the facility, employee(s) required to replace asbestos-containing vinyl floor tiles in the artist room were potentially exposed to the hazard of contact with chrysotile asbestos.  Waste and debris was not disposed of in leak-tight containers.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.1101 G07 I

Serious Gravity 1 1 instance 2 exposed
Issued
Jul 14, 2014
Abate by
Aug 28, 2014
Penalty
Initial $1,200 · Current $720 Reduced

Hazardous substances 9954

29 CFR 1926.1101(g)(7)(i): All Class II work shall be supervised by a competent person as defined in paragraph (b) of this section:    On or about June 23, 2014, in the facility, employee(s) required to replace asbestos-containing vinyl floor tiles (Class II work) in the artist room were potentially exposed to the hazard of contact with chrysotile asbestos.  The work was not supervised by a competent person as defined in paragraph (b) of this section.
Recent events (2)
  • — I (S) $720
  • — Z (S) $1200

1926.1101 K02 I

Serious Gravity 1 1 instance 2 exposed
Issued
Jul 14, 2014
Abate by
Aug 28, 2014
Penalty
Initial $1,200 · Current $720 Reduced

Hazardous substances 9954

29 CFR 1926.1101(k)(2)(i): Before work subject to this standard is begun, building and facility owners shall determine the presence, location, and quantity of ACM and/or PACM at the work site pursuant to paragraph (k)(1) of this section.    On or about June 23, 2014, in the facility, employee(s) required to replace asbestos-containing vinyl floor tiles in the artist room were potentially exposed to the hazard of contact with chrysotile asbestos.  Before work began, the building owner (i.e. employer) did not determine the presence, location, and quantity of asbestos-containing material (ACM) and/or presumed asbestos containing material (PACM) at the work site pursuant to paragraph (k)(1) of this section.
Recent events (2)
  • — I (S) $720
  • — Z (S) $1200

1926.1101 K09 IV A

Serious Gravity 1 1 instance 2 exposed
Issued
Jul 14, 2014
Abate by
Aug 28, 2014
Penalty
Initial $0 · Current $0

Hazardous substances 9954

29 CFR 1926.1101(k)(9)(iv)(A): The employer shall train each employee who is likely to be exposed in excess of the permissible exposure limit (PEL), and each employee who performs Class I through IV asbestos operations.  For work with asbestos containing roofing materials, flooring materials, siding materials, ceiling tiles, or transite panels, training shall include at a minimum all the elements included in paragraph (k)(9)(viii) of this section and in addition, the specific work practices and engineering controls set forth in paragraph (g) of this section which specifically relate to that category. Such course shall include "hands-on" training and shall take at least 8 hours:  On or about June 23, 2014, in the facility, employee(s) required to replace asbestos-containing vinyl floor tiles (Class II asbestos work) in the artist room were potentially exposed to the hazard of contact with chrysotile asbestos.  The employer did not provide the required training to each employee who performed Class II work.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

View Luttrell Engraving INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339831935.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.