NEWPORT, NY —
OSHA Inspection: STEPHEN MILLER GENERAL CONTRACTORS, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of STEPHEN MILLER GENERAL CONTRACTORS, INC. in RT 28, NEWPORT, NY 13416 (NAICS 236210). OSHA activity number 339855884.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- STEPHEN MILLER GENERAL CONTRACTORS, INC.
- Site address
- RT 28
- City
- NEWPORT
- State
- NY
- ZIP
- 13416
- Mailing
- P.O.BOX 291 301 RICEVILLE ROAD, MAYFIELD, NY 12117
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 236210
- Employees
- 4
- Ownership type
- A
Citations
4 citations on file for this inspection.
1926.451 G01 VII
- Issued
- Sep 30, 2014
- Abate by
- Oct 10, 2014
- Penalty
- Initial $4,200 · Current $4,200
General-duty citation text
29 CFR 1926.451(g)(1)(vii): For all scaffolds not otherwise specified in paragraphs (g)(1)(i) through (g)(1)(vi) of this section, each employee shall be protected by the use of personal fall arrest systems or guardrail systems meeting the requirements of paragraph (g)(4) of this section. a) At the job site on or about 7/11/2014: Employee was not provided with guardrails or PFAS on a scaffold 10Feet 6inches above the ground.
Recent events (2)
- — I (O) $4200
- — Z (S) $4200
1926.451 C02 II
- Issued
- Sep 30, 2014
- Abate by
- Oct 10, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.451(c)(2)(ii): Unstable objects shall not be used to support scaffolds or platform units. a) At the job site on or about 7/11/2014: Employee was using a welded metal tube scaffold supported by concrete block and scrap lumber.
Recent events (2)
- — I (O) $0
- — Z (S) $0
1926.451 B05 I
- Issued
- Sep 30, 2014
- Abate by
- Oct 10, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.451(b)(5)(i): Each end of a platform 10 feet or less in length shall not extend over its support more than 12 inches (30 cm) unless the platform is designed and installed so that the cantilevered portion of the platform is able to support employees and/or materials without tipping, or has guardrails which block employee access to the cantilevered end. a) At the job site on or about 7/11/2014: Employee was working from a scaffold plank with a 19 inch overhang on the south side of the scaffold.
Recent events (2)
- — I (O) $0
- — Z (S) $0
1926.451 F03
- Issued
- Sep 30, 2014
- Abate by
- Oct 10, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.451(f)(3): Scaffolds and scaffold components shall be inspected for visible defects by a competent person before each work shift, and after any occurrence which could affect a scaffold's structural integrity. a) At the job site on or about 7/11/2014: Employee was working from a scaffold which had not been inspected by a competent person.
Recent events (2)
- — I (O) $0
- — Z (S) $0
More inspections at Stephen Miller General Contractors, INC.
View Stephen Miller General Contractors, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 236210)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339855884.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.