Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: GLOBAL GROUP INDUSTRIES CORP.

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of GLOBAL GROUP INDUSTRIES CORP. in 950 57TH ST, BROOKLYN, NY 11219 (NAICS 236116). OSHA activity number 339865941.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Global Group Industries Corp. — free Get an email when a new federal OSHA severe-injury report for Global Group Industries Corp. is published. One employer, no account, unsubscribe in one click.
Site address
950 57TH ST
City
BROOKLYN
State
NY
ZIP
11219
Mailing
22 ORCHARD STREET, NEW YORK, NY 10002
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
236116
Employees
4
Ownership type
A

6 citations on file for this inspection.

1926.404 B01

Serious Gravity 5 2 instances 4 exposed
Issued
Jan 16, 2015
Penalty
Initial $2,000 · Current $2,000
29 CFR 1926.404(b)(1): The employer did not use either ground fault circuit interrupters as specified in paragraph (b)(1)(ii) of this section or an assured equipment grounding conductor program as specified in paragraph (b)(1)(iii) of this section to protect employees on construction sites. These requirements are in addition to any other requirements for equipment grounding conductors.  Location: 950 57th Street Brooklyn, NY.   On or about: 07/21/14  a) Employees used a Makita Angle Grinder witch was not protected with GFCI protection or an assured equipment grounding program.
Recent events (1)
  • — Z (S) $2000

1926.404 F06

Serious Gravity 5 1 instance 4 exposed
Issued
Jan 16, 2015
Penalty
Initial $0 · Current $0
29 CFR 1926.404(f)(6): The path to ground from circuits, equipment, or enclosures was not permanent and continuous.   Location: 950 57th Street Brooklyn, NY.   On or about: 07/21/14   a)  A yellow 25 ft. extension cord used to energize the 4 -1/2 Makita Angle grinder was missing the ground pin.
Recent events (1)
  • — Z (S) $0

1926.501 B04 I

Serious Gravity 10 1 instance 4 exposed
Issued
Jan 16, 2015
Penalty
Initial $2,800 · Current $2,800
29 CFR 1926.501(b)(4)(i): Each employee on walking/working surfaces was not protected from falling through holes (including skylights) more than 6 feet (1.8 m) above lower levels, by personal fall arrest systems, covers, or guardrail systems erected around such holes.   Location: 950 57th Street Brooklyn, NY.   On or about: 07/21/14   a) Employees walked and worked next to an unprotected floor hole located at the first floor.
Recent events (1)
  • — Z (S) $2800

1910.1200 E01

Other-than-serious 1 instance 4 exposed
Issued
Jan 16, 2015
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met.     Location: 950 57th Street Brooklyn, NY.   On or about: 07/21/14   a) The employer did not implement and develop a written Hazard Communication Program for each employee exposed/using chemicals such as but not limited to Portland cement.
Recent events (1)
  • — Z (O) $0

1910.1200 G01

Other-than-serious 1 instance 4 exposed
Issued
Jan 16, 2015
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(g)(1): The employer did not have a material safety data sheet for each hazardous chemical which they used.   Location: 950 57th Street Brooklyn, NY.   On or about: 07/21/14  a) Employer did not maintain the required MSDS information sheets to his employees for on site reference of the chemicals being used, including but not limited to Portland cement.
Recent events (1)
  • — Z (O) $0

1910.1200 H01

Other-than-serious 1 instance 4 exposed
Issued
Jan 16, 2015
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area.     Location: 950 57th Street Brooklyn, NY.   On or about: 07/21/14   a)  The employer did not instruct and inform employees of the hazards exposed/using chemicals such as but not limited to portland cement.
Recent events (1)
  • — Z (O) $0

View Global Group Industries Corp.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339865941.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.