FRESH MEADOWS, NY —
OSHA Inspection: GLOBAL GROUP INDUSTRIES CORP.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of GLOBAL GROUP INDUSTRIES CORP. in 75-35 179ST STREET, FRESH MEADOWS, NY 11365 (NAICS 236116). OSHA activity number 340897958.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- GLOBAL GROUP INDUSTRIES CORP.
- Site address
- 75-35 179ST STREET
- City
- FRESH MEADOWS
- State
- NY
- ZIP
- 11365
- Mailing
- 109 ELRIDGE STREET, NEW YORK, NY 10002
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 236116
- Employees
- 6
- Ownership type
- A
Citations
4 citations on file for this inspection.
1926.102 A01
- Issued
- Oct 13, 2015
- Penalty
- Initial $2,000 · Current $1,000 Reduced
General-duty citation text
29 CFR 1926.102(a)(1): Eye and face protective equipment were not used when machines or operations presented potential eye or face injury from physical, chemical, or radiation agents. A.) On or about Thursday, September 3, 2015 a75-35 179th Street, Fresh Meadows, NY 11366 Employees were observed using a portable Markita blade saw to cut masonry bricks without eye protection. ABATEMENT CERTIFICATION IS NOT REQUIRED
Recent events (3)
- — J (S) $1000
- — C (S) $2000
- — Z (S) $2000
1926.300 B03
- Issued
- Oct 13, 2015
- Penalty
- Initial $2,000 · Current $1,000 Reduced
General-duty citation text
29 CFR 1926.300(b)(3): One or more methods of machine guarding were not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. A.) On or about Thursday, September 3, 2015 at 75-35 179th Street, Fresh Meadows, NY 11366 Employees were observed using a hand held portable Markita safety blade to cut masonry bricks not equipped with a safety guard. ABATEMENT CERTIFICATION IS NOT REQUIRED
Recent events (3)
- — J (S) $1000
- — C (S) $2000
- — Z (S) $2000
1926.451 E09 IV
- Issued
- Oct 13, 2015
- Abate by
- Oct 30, 2015
- Penalty
- Initial $2,000 · Current $1,000 Reduced
General-duty citation text
29 CFR 1926.451(e)(9)(iv): Cross braces on tubular welded frame scaffolds were used as a means of access or egress. A.) On or about Thursday, September 3, 2015 at 75-35 179th Street, Fresh Meadows, NY 11365 Employees were observed using the cross braces of tubular welded frame scaffold as a means of access and egress exposing the employees to fall hazards. ABATEMENT CERTIFICATION IS REQUIRED PURSUANT TO 29 CFR 1903.19
Recent events (3)
- — J (S) $1000
- — C (S) $2000
- — Z (S) $2000
1926.451 G01
- Issued
- Oct 13, 2015
- Abate by
- Oct 30, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.451(g)(1): Employees on scaffolds more than 10 feet (3.1 m) above a lower level were not protected from falling to that lower level by fall protection established in paragraphs (g)(1)(i)-(vii) of this section: A.) On or about Thursday, September 3, 2015 at 75-35 179th Street, Fresh Meadows, NY 11365 Employees were observed working on a scaffold work platform erected approximately 12 feet above the lower level hoisting materials without a means of fall protection in place. WRITTEN ABATEMENT CERTIFICATION IS REQUIRED PURSUANT TO 29 CFR 1903.19
Recent events (3)
- — J (S) $0
- — C (S) $0
- — Z (S) $0
More inspections at Global Group Industries Corp.
View Global Group Industries Corp.'s full OSHA safety record →
More inspections in this industry (NAICS 236116)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340897958.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.