CLAY, NY —
OSHA Inspection: OASIS FINISHES, INC.
Unprogrammed Other inspection · Safety discipline
At a glance
On , OSHA opened an unprogrammed Other safety inspection of OASIS FINISHES, INC. in 3968 STATE ROUTE 31, CLAY, NY 13041 (NAICS 238140). OSHA activity number 339891079.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- OASIS FINISHES, INC.
- Site address
- 3968 STATE ROUTE 31
- City
- CLAY
- State
- NY
- ZIP
- 13041
- Mailing
- 80 WOODLAND WAY, BROCKPORT, NY 14420
What kind of inspection was it?
- Inspection type
- Unprogrammed Other (I)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238140
- Employees
- 10
- Ownership type
- A
Citations
3 citations on file for this inspection.
1926.303 B01
- Issued
- Nov 12, 2014
- Abate by
- Nov 22, 2014
- Penalty
- Initial $1,760 · Current $0 Reduced
General-duty citation text
29 CFR 1926.303(b)(1): Grinding machines were not equipped with safety guards in conformance with the requirements of ANSI B7.1-1970, Safety Code for the Use, Care, and Protection of abrasive wheels, and paragraph (d) of this section: a) At the jobsite, on or about 8/8/14: Employees were using a masonry grinder during stone and tile setting, where that grinder did not have the guard over the wheel. Abatement certification must be submitted for this item.
Recent events (3)
- — J (O) $0
- — C (S) $1760
- — Z (S) $1760
1926.451 G01
- Issued
- Nov 12, 2014
- Penalty
- Initial $3,080 · Current $880 Reduced
General-duty citation text
29 CFR 1926.451(g)(1): 29 CFR 1926.451(g)(1): Each employee on a scaffold more than 10 feet (3.1m) above a lower level was not protected from falling to that lower level by fall protection established in accordance with paragraphs (g)(1)(i) through (vii) of this section: a) At the jobsite, on the North side of the building, underneath the entrance portico, on or about 8/8/14: An employee was working from a scaffold plank, approximately 11 feet from ground, without fall protection of any kind.
Recent events (3)
- — J (S) $880
- — C (S) $3080
- — Z (S) $3080
1926.454 A
- Issued
- Nov 12, 2014
- Abate by
- Nov 22, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.454(a): The employer did not have each employee who performed work while on a scaffold trained by a person qualified in the subject matter to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards. a) At the jobsite, on the North side of the building, underneath the entrance portico, on or about 8/8/14: An employee was working from a scaffold plank, approximately 11 feet from ground, without fall protection of any kind and without being trained to recognize hazards associated with scaffolding. Abatement certification must be submitted for this item.
Recent events (3)
- — J (S) $0
- — C (S) $0
- — Z (S) $0
More inspections at Oasis Finishes, INC.
View Oasis Finishes, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 238140)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339891079.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.