CLEVELAND, OH —
OSHA Inspection: CLEVELAND TRACK MATERIAL, INC.
Federal Agency inspection · Safety discipline
At a glance
On , OSHA opened a federal Agency safety inspection of CLEVELAND TRACK MATERIAL, INC. in 7000 CENTRAL AVE, CLEVELAND, OH 44104 (NAICS 331111). OSHA activity number 339913519.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CLEVELAND TRACK MATERIAL, INC.
- Site address
- 7000 CENTRAL AVE
- City
- CLEVELAND
- State
- OH
- ZIP
- 44104
- Mailing
- 7000 CENTRAL AVE, CLEVELAND, OH 44104
What kind of inspection was it?
- Inspection type
- Federal Agency (M)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 331111
- Employees
- 80
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.147 C04 I
- Issued
- Nov 3, 2014
- Abate by
- Jan 16, 2015
- Penalty
- Initial $7,000 · Current $5,600 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: During the week of August 18, 2014, the employer failed to ensure employees locking out the Rolling Mill C0074 to repair the chain and sprocket on the spinner shafts utilized the company's lockout tagout procedures.
Recent events (2)
- — I (S) $5600
- — Z (S) $7000
1910.147 C04 II B
- Issued
- Nov 3, 2014
- Abate by
- Jan 16, 2015
- Penalty
- Initial $7,000 · Current $5,600 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(ii)(B): The energy control procedures did not clearly and specifically outline the steps for shutting down, isolating, blocking and securing machines or equipment to control hazardous energy: During the week of August 18, 2014, the employer failed to ensure specific procedural steps included all sources of energy, in that, thermal and kinetic energy were not identified and controlled prior to employees performing service and maintenance on Rolling Mill C0074.
Recent events (2)
- — I (S) $5600
- — Z (S) $7000
1910.147 C07 I A
- Issued
- Nov 3, 2014
- Abate by
- Jan 16, 2015
- Penalty
- Initial $7,000 · Current $5,600 Reduced
General-duty citation text
29 CFR 1910.147(c)(7)(i)(A): Authorized employee(s) did not receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolate: During the week of August 18, 2014, the employer failed to ensure employees locking out the Rolling Mill C0074 received authorized lockout tagout training.
Recent events (2)
- — I (S) $5600
- — Z (S) $7000
1910.147 D04 I
- Issued
- Nov 3, 2014
- Abate by
- Jan 16, 2015
- Penalty
- Initial $7,000 · Current $5,600 Reduced
General-duty citation text
29 CFR 1910.147(d)(4)(i): Lockout or tagout devices were not affixed to each energy isolating device by authorized employees: During the week of August 18, 2014, the employer failed to ensure that employees lockout the power distribution panel prior to entering the spinner shaft area of Rolling Mill C0074 to repair the chain and sprocket.
Recent events (2)
- — I (S) $5600
- — Z (S) $7000
1910.147 F03 II D
- Issued
- Nov 3, 2014
- Abate by
- Jan 16, 2015
- Penalty
- Initial $7,000 · Current $5,600 Reduced
General-duty citation text
29 CFR 1910.147(f)(3)(ii)(D): Each authorized employee did not affix a personal lockout or tagout device to the group lockout device before working on the machine or equipment: During the week of August 18, 2014, the employer failed to ensure group lockout is used when more than one employee is performing work on the Rolling Mill C0074. Employees enter the spinner shaft area to repair the chain sprocket on the spinner shafts with only one lock on the power supply.
Recent events (2)
- — I (S) $5600
- — Z (S) $7000
1910.219 C02 I
- Issued
- Nov 3, 2014
- Abate by
- Jan 16, 2015
- Penalty
- Initial $7,000 · Current $7,000
General-duty citation text
29 CFR 1910.219(c)(2)(i): All exposed part(s) of horizontal shafting seven (7) feet or less from floor or working platform were not protected by stationary casing(s) enclosing shafting completely or by trough(s) enclosing sides and top or sides and bottom of shafting: On or about August 21, 2014, the employer failed to ensure employees tightening/loosening the set screw on Rolling Mill C0074 were protected against accidental contact with the rotating spinner shafts.
Recent events (2)
- — I (S) $7000
- — Z (S) $7000
1910.219 F03
- Issued
- Nov 3, 2014
- Abate by
- Jan 16, 2015
- Penalty
- Initial $7,000 · Current $0 Reduced
General-duty citation text
29 CFR 1910.219(f)(3): Sprocket wheels and chains which were seven [7] feet or less above floors or platforms were not enclosed: On or about August 21, 2014, the employer failed to ensure employees adjusting the set screw on Rolling Mill C0074 were protected against accidental contact with the rotating sprocket and chain.
Recent events (2)
- — I (S) $0
- — Z (S) $7000
More inspections at Cleveland Track Material, INC.
View Cleveland Track Material, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 331111)
More inspections in OH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339913519.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.