OSHA Inspection: JTF CONSTRUCTION INC.

Issued

Oct 2, 2014

Abate by

Oct 8, 2014

Penalty

Initial $1,760 · Current $100 Reduced

General-duty citation text

29 CFR 1926.100(a):  Employees were not protected by protective helmets while working in areas where there was a possible danger of head injury from impact, or from falling or flying objects, or from electrical shock and burns:       a)  Employees were not wearing protective helmets where there was a possible danger of head injury.    In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).

Issued

Oct 2, 2014

Abate by

Oct 8, 2014

Penalty

Initial $3,080 · Current $1,700 Reduced

General-duty citation text

29 CFR 1926.451(b)(1): Each platform on all working levels of scaffolds was not fully planked or decked between the front uprights and the guardrail supports as specified in paragraphs 1926.451(b)(1)(i)-(ii):       a)  Employees were exposed to the hazard of falling approximately 15 feet to the ground, while performing masonry work from tubular welded frame scaffold platform that was not fully planked.        In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.

Issued

Oct 2, 2014

Abate by

Oct 8, 2014

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1926.451(g)(1): Each employee on a scaffold more than 10 feet above a lower level was not protected from falling to that lower level.     a)  Employees were exposed to the hazard of falling approximately 15 feet to the ground, while performing masonry work from tubular welded frame scaffold platform.      In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.