Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: RODNEY HUNT COMPANY INC.

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of RODNEY HUNT COMPANY INC. in 46 MILL ST., ORANGE, MA 01364 (NAICS 332312). OSHA activity number 339945958.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Rodney Hunt Company INC. — free Get an email when a new federal OSHA severe-injury report for Rodney Hunt Company INC. is published. One employer, no account, unsubscribe in one click.
Site address
46 MILL ST.
City
ORANGE
State
MA
ZIP
01364
Mailing
46 MILL ST., ORANGE, MA 01364
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332312
Employees
8000
Ownership type
A

8 citations on file for this inspection.

1910.252 B02 III

Serious Gravity 1 1 instance 1 exposed
Issued
Sep 30, 2014
Abate by
Oct 6, 2014
Penalty
Initial $3,000 · Current $2,000 Reduced
29 CFR 1910.252(b)(2)(iii): Workers and other persons adjacent to the welding area were not protected from the rays by noncombustible or flameproof screens or shields:    Cast gates and valve building, welding area adjacent lathe machines,  Rodney Hunt Company, 46 Mill Street, Orange MA:  Employees were exposed to ultra violet rays while walking and working in areas where welding was being done without properly positioned screens or shields.
Recent events (2)
  • — I (S) $2000
  • — Z (S) $3000

1910.303 B02

Other-than-serious 1 instance 1 exposed
Issued
Sep 30, 2014
Abate by
Oct 6, 2014
Penalty
Initial $3,000 · Current $0 Reduced
29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling:    Cast gates and valve building, shipping and receiving desk area, Rodney Hunt Company, Orange, MA: Employees were exposed to electrical shock hazards while using a power strip (RPT) not listed for use in industrial settings.
Recent events (2)
  • — I (O) $0
  • — Z (S) $3000

1910.303 G01

Serious Gravity 5 2 instances 2 exposed
Issued
Sep 30, 2014
Abate by
Oct 6, 2014
Penalty
Initial $4,000 · Current $3,000 Reduced
29 CFR 1910.303(g)(1): Space about electric equipment. Sufficient access and working space shall be provided and maintained about all electric equipment to permit ready and safe operation and maintenance of such equipment.    Cast gates and valves building, various locations, Rodney Hunt Company, Orange, MA: Wall hung distribution panels and disconnect switches were blocked, preventing ready and safe access for maintenance and operation.
Recent events (2)
  • — I (S) $3000
  • — Z (S) $4000

1910.303 F02

Serious Gravity 5 1 instance 1 exposed
Issued
Sep 30, 2014
Abate by
Oct 10, 2014
Penalty
Initial $0 · Current $0
29 CFR 1910.303(f)(2): Each service, feeder, and branch circuit, at its disconnecting means or overcurrent device, was not legibly marked to indicate its purpose, nor located and arranged so the purpose was evident:      Cast gates and valve building, various locations, Rodney Hunt Company, Orange, MA:  Wall hung electrical distribution panels were not marked to indicate the circuit or equipment powered by each breaker.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.305 A02 II

Other-than-serious 1 instance 3 exposed
Issued
Sep 30, 2014
Abate by
Oct 6, 2014
Penalty
Initial $3,000 · Current $0 Reduced
29 CFR 1910.305(a)(2)(ii): Temporary wiring shall be removed immediately upon completion of the project or purpose for which the wiring was installed.    Cast gates and vale building, facility wide, Rodney Hunt Company, Orange, MA: Extension cords were left plugged into the outlets when no longer in use.
Recent events (2)
  • — I (O) $0
  • — Z (S) $3000

1910.305 G01 IV A

Other-than-serious 2 instances 2 exposed
Issued
Sep 30, 2014
Abate by
Oct 6, 2014
Penalty
Initial $0 · Current $0

Hazardous substances 8870

29 CFR 1910.305(g)(1)(iv)(A): Flexible cords and/or cables were used as a substitute for the fixed wiring of a structure:    Cast gates and valves building, welding area, Rodney Hunt Company, Orange, MA: Extension cords were used as a substitute for permanent wiring exposing employees to electric shock hazards.
Recent events (2)
  • — I (O) $0
  • — Z (S) $0

1910.178 A06

Other-than-serious 3 instances 3 exposed
Issued
Sep 30, 2014
Abate by
Nov 14, 2014
Penalty
Initial $0 · Current $0
29 CFR 1910.178(a)(6): The employer did not ensure that all nameplates or markings were maintained in a legible condition:    Cast gate building, 46 Mill Street, Orange, Massachusetts; Label plates on forklifts, that indicate the lifting capacity of the machines, were not maintained in a legible condition.    (a) Cast gates and valve building, main production floor,  yellow Daewoo forklift.    (b) Cast gates and valve building, shipping and receiving area, yellow Hyster forklift.    (c) Cast gates and valve building, production floor, yellow Caterpillar forklift.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.1200 F05

Other-than-serious 3 instances 1 exposed
Issued
Sep 30, 2014
Abate by
Oct 10, 2014
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(f)(5): The employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged, or marked with the identity and appropriate hazard warnings regarding the chemicals contained therein:  Gate and Valve Building, Rodney Hunt Company, 46 Mill Street, Orange, Massachusetts; Second use containers were not labeled to indicate what chemical was inside.  (a)  assembly area, second use containers with cleaning solvent were not labeled.  (b)  rip saw, shipping and receiving, second use containers with cutting were not labeled.  (c)  lathe #2, second use containers with cutting oil were not labeled.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View Rodney Hunt Company INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339945958.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.