Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: FUZION TECHNOLOGIES, INC.

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of FUZION TECHNOLOGIES, INC. in 500 MILL STREET, FREEPORT, PA 16229 (NAICS 327124). OSHA activity number 339952533.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Fuzion Technologies, INC. — free Get an email when a new federal OSHA severe-injury report for Fuzion Technologies, INC. is published. One employer, no account, unsubscribe in one click.
Site address
500 MILL STREET
City
FREEPORT
State
PA
ZIP
16229
Mailing
P.O. BOX 338, FREEPORT, PA 16229
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
A
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
327124
Employees
37
Ownership type
A

3 citations on file for this inspection.

1910.212 A03 II

Serious Gravity 5 1 instance 3 exposed
Issued
Oct 22, 2014
Abate by
Nov 3, 2014
Penalty
Initial $2,800 · Current $1,400 Reduced
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s):                                                                         a)  Pug mill, Altoona Building, 500 Mill Street, Freeport PA 16229:  Observed on or about September 11, 2014, the rotating auger on a Chambers 12C pug tub was not guarded.  The auger was located in a tub that was open on top.  The opening measured approximately 2 feet 4 inches wide and 11 feet 5 inches long.  Pug mill operators working between the pug mill and the pug mill control panel were exposed to caught-by and cut-by hazards.
Recent events (2)
  • — I (S) $1400
  • — Z (S) $2800

1910.219 F01

Serious Gravity 5 1 instance 4 exposed
Issued
Oct 22, 2014
Abate by
Nov 3, 2014
Penalty
Initial $2,800 · Current $1,400 Reduced
29 CFR 1910.219(f)(1):  Gear(s) were not guarded by a complete enclosure or by one of the methods specified in 29 CFR 1910.219(f)(1)(ii) and (f)(1)(iii):   a) #1 Dry Press, Production area next to kiln, 500 Mill Street, Freeport PA 16229:  Observed on or about September 11, 2014, gears located to the left of the 400 ton #1 press were not guarded.  A gap of 1 feet 9 inches between the left side of the #1 dry press and the wall permitted employee access to the area of the gears.  Employees were exposed to caught-by hazards while operating the #1 dry press.
Recent events (2)
  • — I (S) $1400
  • — Z (S) $2800

1910.305 A02 IX

Other-than-serious 1 instance 5 exposed
Issued
Oct 22, 2014
Abate by
Nov 3, 2014
Penalty
Initial $0 · Current $0
29 CFR 1910.305(a)(2)(ix):  All lamps for general illumination were not protected from accidental contact or breakage by a suitable fixture or lampholder with a guard:   a) #1 Dry Press, Production area next to kiln, 500 Mill Street, Freeport PA 16229:  Observed on or about September 11, 2014, the light bulbs on a light fixture located above the operators station of the #1 Dry Press was not protected from accidental contact or breakage by a suitable fixture or lampholder with a guard.  The lamp was located approximately 6 feet 4.5 inches from the floor.  Employees operating the #1 Dry Press were exposed to cut-by and electrical shock hazards.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View Fuzion Technologies, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339952533.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.