CONCORDIA, MO —
OSHA Inspection: MILBANK MANUFACTURING
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of MILBANK MANUFACTURING in 1601 SOUTH ST. LOUIS ST., CONCORDIA, MO 64020 (NAICS 332116). OSHA activity number 339979676.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MILBANK MANUFACTURING
- Site address
- 1601 SOUTH ST. LOUIS ST.
- City
- CONCORDIA
- State
- MO
- ZIP
- 64020
- Mailing
- 1601 SOUTH ST. LOUIS ST., CONCORDIA, MO 64020
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332116
- Employees
- 130
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.217 C02 I B
- Issued
- Nov 5, 2014
- Penalty
- Initial $4,250 · Current $0 Reduced
General-duty citation text
29 CFR 1910.217(c)(2)(i)(b): Point of operation guard(s) on mechanical power press(es) did not conform to the maximum permissible opening(s) specified in Table 10 O-10: (a) Press Area: Employees were exposed to amputation hazards as the guard for the C 187 Federal Press did not meet that Table 0-10 scale opening on the left hand side facing the press.
Recent events (2)
- — I (S) $0
- — Z (S) $4250
1910.303 G01 II
- Issued
- Nov 5, 2014
- Penalty
- Initial $3,400 · Current $0 Reduced
General-duty citation text
29 CFR 1910.303(g)(1)(ii): The required working space about electric equipment rated 600 volts, nominal, or less to ground, was used for storage: (a) Battery Charging Station: Employees were exposed to electrical hazards as the area in front of Electrical Panel P-8 was used for storage as the NAPA portable battery charger and other items were stored in front of the panel.
Recent events (2)
- — I (O) $0
- — Z (S) $3400
1910.305 B01 II
- Issued
- Nov 5, 2014
- Penalty
- Initial $3,400 · Current $0 Reduced
General-duty citation text
29 CFR 1910.305(b)(1)(ii): Unused openings in boxes, cabinets, or fittings were not effectively closed: (a) Press Area: Employees were exposed to electrical hazards as there was an open knockout on the side of the reset electrical box on the C186 Federal F5-60 ton press.
Recent events (2)
- — I (O) $0
- — Z (S) $3400
1910.305 J01 I
- Issued
- Nov 5, 2014
- Penalty
- Initial $3,400 · Current $2,380 Reduced
General-duty citation text
29 CFR 1910.305(j)(1)(i): Fixtures, lampholders, lamps, rosettes, and receptacles located within 8 feet of the floor had live parts exposed to employee contact: (a) Shipping: Employees were exposed to live electrical parts as the Dock Door 4 dock light did not have a light bulb and the light fixture was turned on.
Recent events (2)
- — I (S) $2380
- — Z (S) $3400
1910.1200 F06 I
- Issued
- Nov 5, 2014
- Penalty
- Initial $2,550 · Current $1,785 Reduced
General-duty citation text
29 CFR 1910.1200(f)(6)(i): Except as provided in 29 CFR 1910.1200(f)(7) and 29 CFR 1910.1200(f)(8), the employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged or marked with the information required by 29 CFR 1910.1200(f)(1)(i) through 29 CFR 1910.1200(f)(1)(v) (a) Maintenance Shop: Employees were exposed to hazardous chemicals as there was an unlabeled spray bottle containing Boelube cutting fluid by the Clausing Drill Press which did not have the identity of the product and a hazard warning and the cutting fluid is flammable. (b) Maintenance Shop: Employees were exposed to hazardous chemicals as there was an unlabeled plastic pitcher containing MFA Hydraulic Oil which did not have the identity of the product and a hazard warning and the hydraulic oil is flammable.
Recent events (2)
- — I (O) $1785
- — Z (S) $2550
More inspections at Milbank Manufacturing
View Milbank Manufacturing's full OSHA safety record →
More inspections in this industry (NAICS 332116)
More inspections in MO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339979676.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.