BATH, NH ·
OSHA Inspection: H.G. WOOD INDUSTRIES, LLC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of H.G. WOOD INDUSTRIES, LLC in 32 SAWMILL RD. PO BOX 148, BATH, NH 03740 (NAICS 321113). OSHA activity number 339983579.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- H.G. WOOD INDUSTRIES, LLC
- Site address
- 32 SAWMILL RD. PO BOX 148
- City
- BATH
- State
- NH
- ZIP
- 03740
- Mailing
- 32 SAWMILL RD. P.O. BOX 148, BATH, NH 03740
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321113
- Employees
- 33
- Ownership type
- Private (A)
Citations
5 citations on file for this inspection.
1910.23 D01
- Issued
- Oct 16, 2014
- Abate by
- Oct 22, 2014
- Penalty
- Initial $1,575 · Current $788 Reduced
General-duty citation text
29 CFR 1910.23(d)(1): Flights of stairs having four or more risers were not equipped with a standard railing as specified in paragraphs (d)(1)(i) through (v) of this section: a. Saw mill building - On or about October 1, 2014, the staircase leading to the tremmer work area was not provided with a mid-rail on the open side of the staircase.
Recent events (2)
- · I (S) $787.5
- · Z (S) $1575
1910.212 A01
- Issued
- Oct 16, 2014
- Abate by
- Oct 22, 2014
- Penalty
- Initial $2,625 · Current $1,313 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: Instanced a. Planer Mill Building - On or about October 1, 2014, the Yates V-602 American machine conveyor systems, end metal rotating drum was not guarded at the in-running nip point. Instanced b. Saw Mill Building - On or about October 1, 2014, the projecting roller ends on the Stenner machine were not guarded.
Recent events (2)
- · I (S) $1312.5
- · Z (S) $2625
1910.305 J01 I
- Issued
- Oct 16, 2014
- Abate by
- Oct 22, 2014
- Penalty
- Initial $1,575 · Current $788 Reduced
General-duty citation text
29 CFR 1910.305(j)(1)(i): Fixtures, lampholders, lamps, rosettes, and receptacles located within 8 feet of the floor had live parts exposed to employee contact: a. Maintenance Garage - On or about October 1, 2014, the receptacle box utilized for powering the freestanding Amrox heavy-duty drill was damaged and exposing energized electrical parts.
Recent events (2)
- · I (S) $787.5
- · Z (S) $1575
1910.219 F03
- Issued
- Oct 16, 2014
- Abate by
- Oct 22, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(f)(3): Sprocket wheels and chains which were seven -7 feet or less above floors or platforms were not enclosed: a. Grinding Shed - On or about October 1, 2014, the Stick Stacker machine's sprocket wheel and chain were not guarded to prevent employees from coming in contact with the rotating parts..
Recent events (2)
- · I (O) $0
- · Z (O) $0
1910.303 G01
- Issued
- Oct 16, 2014
- Abate by
- Oct 22, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(g)(1): Sufficient access and working space was not provided and maintained about all electric equipment (operating at 600 volts, nominal, or less to ground) to permit ready and safe operation and maintenance of such equipment: a. Maintenance Garage - On or about October 1, 2014, the American Proline hot water heater and disconnect were blocked and not made accessible during emergency or maintenance events.
Recent events (2)
- · I (O) $0
- · Z (O) $0
More inspections at H.G. Wood Industries, LLC
View H.G. Wood Industries, LLC's full OSHA safety record →
More inspections in this industry (NAICS 321113)
More inspections in NH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 339983579.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.