LEBANON, PA —
OSHA Inspection: ALWAYS BAGELS, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of ALWAYS BAGELS, INC. in 3010 HANFORD DRIVE, LEBANON, PA 17046 (NAICS 311813). OSHA activity number 339994808.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ALWAYS BAGELS, INC.
- Site address
- 3010 HANFORD DRIVE
- City
- LEBANON
- State
- PA
- ZIP
- 17046
- Mailing
- 3010 HANFORD DRIVE, LEBANON, PA 17046
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 311813
- Employees
- 100
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.147 C04 II
- Issued
- Dec 18, 2014
- Abate by
- Jan 22, 2015
- Penalty
- Initial $2,975 · Current $2,231 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(ii): The energy control procedures did not clearly and specifically outline the scope, purpose, authorization, rules, and techniques to be utilized for the control of hazardous energy, including, but not limited to items (a) through (d) of this section: a) 3010 Hanford Drive, Lebanon PA; Facility Wide - The employer's energy control procedures did not clearly and specifically outline the steps to be followed by authorized employees where equipment such as, but not limited to, a best pack machine; DeLaBellini; retarder; proof box; and spiral freezer are maintained and serviced, on or about October 8, 2014. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (S) $2231.25
- — Z (S) $2975
1910.178 L01 I
- Issued
- Dec 18, 2014
- Abate by
- Jan 22, 2015
- Penalty
- Initial $3,570 · Current $2,678 Reduced
General-duty citation text
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l): a) 3010 Hanford Drive, Lebanon PA - The employer does not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in paragraph (l). Employees operated a Yale forklift and a Crown reach truck without completing the required training and/or evaluation, on or about October 8, 2014. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (S) $2677.5
- — Z (S) $3570
1910.212 A03 II
- Issued
- Dec 18, 2014
- Abate by
- Jan 15, 2015
- Penalty
- Initial $2,380 · Current $1,785 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): a) 3010 Hanford Drive, Lebanon PA; Freeze Pack - A guard opening of 32 inches x 34 inches on the box tape machine did not prevent employees from reaching inside the machine next to and at the point of operation, exposing employees to struck-by and caught-in hazards, on or about October 8, 2014. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (S) $1785
- — Z (S) $2380
1910.263 C03
- Issued
- Dec 18, 2014
- Abate by
- Jan 15, 2015
- Penalty
- Initial $1,785 · Current $1,339 Reduced
General-duty citation text
29 CFR 1910.263(c)(3): Sprocket(s) and V-belt drive(s) of bakery machinery located within reach from platform(s) or passageway(s) or located within 8 feet 6 inches from the floor were not completely enclosed: a) 3010 Hanford Drive, Lebanon PA; Oven - Employees working in the kettle and seeder area of the oven were exposed to caught-in hazards as they stood within inches of unenclosed rotating sprockets, on or about October 8, 2014. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (S) $1338.75
- — Z (S) $1785
1910.157 G01
- Issued
- Dec 18, 2014
- Abate by
- Jan 22, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.157(g)(1): An educational program was not provided for all employees to familiarize them with the general principles of fire extinguisher use and the hazards involved with incipient stage fire fighting: a) 3010 Hanford Drive, Lebanon PA; Facility Wide - Portable fire extinguishers are provided for use by employees and the employer did not provide an educational program for all employees to familiarize them with general principles of fire extinguisher use and the hazards involved with incipient stage firefighting, thus exposing employees to fire hazard related injuries, on or about October 8, 2014. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Always Bagels, INC.
View Always Bagels, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 311813)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339994808.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.