BENSALEM, PA —
OSHA Inspection: IMAGEONE INDUSTRIES, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of IMAGEONE INDUSTRIES, INC. in 677 DUNKSFERRY RD., BENSALEM, PA 19020 (NAICS 339950). OSHA activity number 340000462.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- IMAGEONE INDUSTRIES, INC.
- Site address
- 677 DUNKSFERRY RD.
- City
- BENSALEM
- State
- PA
- ZIP
- 19020
- Mailing
- 677 DUNKSFERRY RD., BENSALEM, PA 19020
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 339950
- Employees
- 122
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.178 L01 I
- Issued
- Dec 11, 2014
- Abate by
- Dec 21, 2014
- Penalty
- Initial $3,366 · Current $1,683 Reduced
General-duty citation text
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l): a) Welding Shop - On or about October 16, 2014, the employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely.
Recent events (2)
- — I (S) $1683
- — Z (S) $3366
1910.178 L06
- Issued
- Dec 11, 2014
- Abate by
- Dec 21, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(6): The employer did not certify that each operator has been trained and evaluated as required by this paragraph (l): a) Warehouse - On or about October 16, 2014, the employer did not certify in writing that employees who received forklift training certification prior to hire were observed operating forklift in safe manner.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.178 Q07
- Issued
- Dec 11, 2014
- Penalty
- Initial $3,366 · Current $0 Reduced
General-duty citation text
29 CFR 1910.178(q)(7): Industrial trucks were not examined before being placed in service: a) Worksite - On or about October 16, 2014, the employer is not requiring daily inspections of the forklifts to be performed prior to their daily usage.
Recent events (2)
- — I (S) $0
- — Z (S) $3366
1910.184 C01
- Issued
- Dec 11, 2014
- Penalty
- Initial $3,366 · Current $1,926 Reduced
General-duty citation text
29 CFR 1910.184(c)(1): Sling(s) that were damaged or defective were used: a) Welding Shop - On or about October 16 2014, a nylon sling with visible damage was being used to hoist steel frames and had not been taken out of service.
Recent events (2)
- — I (S) $1926
- — Z (S) $3366
1910.184 D
- Issued
- Dec 11, 2014
- Abate by
- Dec 21, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.184(d): Each day before being used, the sling and all fastenings and attachments were not being inspected for damage or defects by a competent person designated by the employer: a) Welding Shop - On or about October 16, 2014, employees were using nylon slings to lift metal frames which were not inspected for damage prior to use.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.212 A01
- Issued
- Dec 11, 2014
- Abate by
- Dec 21, 2014
- Penalty
- Initial $3,366 · Current $1,683 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) Welding Shop - On or about November 12, 2014, the Hydmech S-20P horizontal band saw was use, but did not have the unused portion of the blade guarded to prevent potential employee injury.
Recent events (2)
- — I (S) $1683
- — Z (S) $3366
More inspections at Imageone Industries, INC.
View Imageone Industries, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 339950)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340000462.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.