DUBLIN, GA —
OSHA Inspection: DINEX EMISSION, INC.
Referral inspection · Health discipline
At a glance
On , OSHA opened a referral health inspection of DINEX EMISSION, INC. in 2020 WALDREP INDUSTRIAL BLVD., DUBLIN, GA 31021 (NAICS 423120). OSHA activity number 340016849.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- DINEX EMISSION, INC.
- Site address
- 2020 WALDREP INDUSTRIAL BLVD.
- City
- DUBLIN
- State
- GA
- ZIP
- 31021
- Mailing
- 2020 WALDREP INDUSTRIAL BLVD., DUBLIN, GA 31021
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 423120
- Employees
- 48
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.1026 L01
- Issued
- Dec 19, 2014
- Abate by
- Jan 16, 2015
- Penalty
- Initial $1,785 · Current $1,785
General-duty citation text
29 CFR 1910.1026(l)(1): The employer did not ensure that all employees who were assigned to workplaces where there was exposure to chromium (VI) were provided with information and training as required by the Hazard Communication Standard 29 CFR 1910.1200: a) At the welding and cutting departments - On or about and at times prior to October 17, 2014, the employer did not provide training about the health hazards associated with exposure to hexavalent chromium or the source of the exposure for employees who were cutting and welding stainless steel exhaust and emission systems, exposing employees to safety and health hazards.
Recent events (1)
- — Z (S) $1785
1910.1026 L02 I A
- Issued
- Dec 19, 2014
- Abate by
- Jan 16, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1026(l)(2)(i)(A): The employer did not provide appropriate information and training for all employees exposed to chromium (VI), in that employees could not demonstrate knowledge of the contents of the Chromium (VI) standard, 29 CFR 1910.1026: a) At the welding and cutting departments - On or about and at times prior to October 17, 2014, the employer did not provide information about the hexavalent chromium standard for employees who were cutting and welding stainless steel exhaust and emission systems, exposing employees to safety and health hazards.
Recent events (1)
- — Z (S) $0
1910.1026 L02 II
- Issued
- Dec 19, 2014
- Abate by
- Jan 16, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1026(l)(2)(ii): The employer did not make a copy of the Chromium (VI) standard, 29 CFR 1910.1026, readily available to all employees who were exposed to chromium (VI): a) At the welding and cutting departments - On or about and at times prior to October 17, 2014, the employer did not provide a copy of the hexavalent chromium standard for employees who were cutting and welding stainless steel exhaust and emission systems, exposing employees to safety and health hazards.
Recent events (1)
- — Z (S) $0
1910.1026 D01
- Issued
- Dec 19, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1026(d)(1): The employer with a workplace or work operation covered by this standard did not determine the 8-hour time-weighted average exposure for each employee exposed to chromium (VI): a) At the welding and cutting departments - On or about and at times prior to October 17, 2014, hexavalent chromium exposure levels were not determined for employees who were cutting and welding stainless steel exhaust and emission systems, exposing employees to safety and health hazards.
Recent events (1)
- — Z (O) $0
1910.1200 E01
- Issued
- Dec 19, 2014
- Abate by
- Jan 16, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met: a) At the facility - On or about and at times prior to October 17, 2014, the employer did not develop, implement and/or maintain a written hazard communication program for employees that were cutting and welding stainless steel exhaust and emission systems, exposing employees to safety and health hazards.
Recent events (1)
- — Z (O) $0
More inspections at Dinex Emission, INC.
View Dinex Emission, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 423120)
More inspections in GA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340016849.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.