NEW CARLISLE, OH ·
OSHA Inspection: TAYLOR TOOL & DIE, INC.
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of TAYLOR TOOL & DIE, INC. in 306 NORTH MAIN STREET, NEW CARLISLE, OH 45344 (NAICS 333513). OSHA activity number 340024272.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- TAYLOR TOOL & DIE, INC.
- Site address
- 306 NORTH MAIN STREET
- City
- NEW CARLISLE
- State
- OH
- ZIP
- 45344
- Mailing
- 306 NORTH MAIN STREET, NEW CARLISLE, OH 45344
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 333513
- Employees
- 13
- Ownership type
- Private (A)
Citations
5 citations on file for this inspection.
1910.1200 E01
- Issued
- Mar 4, 2015
- Abate by
- Apr 30, 2015
- Penalty
- Initial $1,200 · Current $200 Reduced
General-duty citation text
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met: On or about October 21, 2014, the employer did not develop, implement and maintain a written hazard communication program for employees exposed to chemical hazards while using chemicals such as but not limited to; Trim E206 as coolant in a CNC machine.
Recent events (2)
- · I (O) $200
- · Z (S) $1200
1910.1200 H03
- Issued
- Mar 4, 2015
- Abate by
- Mar 16, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(h)(3): The employee training did not include the requirements of 29 CFR 1910.1200(h)(3)(i) through (h)(3)(iv): On or about October 21, 2014, for employees working with chemicals such as but not limited to; Trim E206 the employees were not trained on the details of the hazard communication program and the hazards of the products.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1904.4 A
- Issued
- Mar 4, 2015
- Abate by
- Mar 18, 2015
- Penalty
- Initial $400 · Current $0 Reduced
General-duty citation text
29 CFR 1904.4(a): The employer did not record each work-related fatality, injury or illness case that resulted in the general recording criteria on the OSHA Form 300 or equivalent. On or about September 24, 2014, the employer did not record an injury requiring restricted work that occurred on or about September 17, 2014.
Recent events (2)
- · I (O) $0
- · Z (O) $400
1910.132 D02
- Issued
- Feb 10, 2015
- Abate by
- Feb 23, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.132(d)(2): The employer did not verify that the required workplace hazard assessment has been performed through a written certification which included the requirements as outlined in 29 CFR 1910.132(d)(2): On or about October 21, for employees supplied with 3M N 95 respirators for voluntary use to protect against potential respiratory hazards where the employer did not certify in writing that a hazard assessment had been performed in the shop at 306 North Main Street in New Carlisle, Ohio.
Recent events (2)
- · I (O) $0
- · Z (O) $0
1910.134 C02 I
- Issued
- Feb 10, 2015
- Abate by
- Feb 23, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(c)(2)(i): Respirator users were not provided with the information contained in Appendix D to 29 CFR 1910.134 when the employer determined that any voluntary respirator use was permissible: On or about October 21, 2014, employees were exposed to respiratory hazards where they were supplied with 3M N95 respirators without the information provided in Appendix D.
Recent events (2)
- · I (O) $0
- · Z (O) $0
More inspections at Taylor Tool & DIE, INC.
View Taylor Tool & DIE, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 333513)
More inspections in OH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 340024272.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.