LANCASTER, NY —
OSHA Inspection: SEIBEL MODERN MANUFACTURING & WELDING CORP.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of SEIBEL MODERN MANUFACTURING & WELDING CORP. in 38 PALMER PLACE, LANCASTER, NY 14086 (NAICS 332999). OSHA activity number 340040492.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SEIBEL MODERN MANUFACTURING & WELDING CORP.
- Site address
- 38 PALMER PLACE
- City
- LANCASTER
- State
- NY
- ZIP
- 14086
- Mailing
- 38 PALMER PLACE, LANCASTER, NY 14086
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332999
- Employees
- 65
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.217 B04 I
- Issued
- Oct 31, 2014
- Abate by
- Nov 25, 2014
- Penalty
- Initial $2,975 · Current $1,935 Reduced
General-duty citation text
29 CFR 1910.217(b)(4)(i): Pedal mechanism(s) on mechanical power press(es)full revolution clutches were not protected to prevent unintended operation from falling or moving objects or by accidental stepping onto the pedals: a) On o r about 10/23/2014 in the press department; where the stroke activation means (foot pedal) was not guarded (Federal press, serial #2-700), or was inadequately guarded (sides wide open on the Niagara A-2 1/2 - serial #23389) against unintended operation. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $1935
- — Z (S) $2975
1910.217 B04 II
- Issued
- Oct 31, 2014
- Abate by
- Nov 25, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.217(b)(4)(ii): Mechanical power press(es) using full revolution clutches were not provided with a pad with a nonslip contact area firmly attached to the pedal: a) On or about 10/23/2014 in the press department; where the pedal was missing on the Federal press, (serial #2-700). ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.217 E01 I
- Issued
- Oct 31, 2014
- Abate by
- Nov 25, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.217(e)(1)(i): A program of periodic and regular inspections of mechanical power press(es) was not established and followed to ensure that all parts, auxiliary equipment and safeguards were in a safe operating condition and adjustment: a) On or about 10/23/2014 in the press department; where the employer's inspection program for mechanical power presses provided for only annual inspections of mechanical power presses. The last documented power press inspection was performed in February of 2014. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.217 E01 II
- Issued
- Oct 31, 2014
- Abate by
- Nov 25, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.217(e)(1)(ii): Each press was not inspected and tested no less than weekly to determine the condition of the clutch/brake mechanism, antirepeat feature and single stroke mechanism: a) On or about 10/23/2014 in the press department; where last recorded press inspection was in February 2014. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at Seibel Modern Manufacturing & Welding Corp.
View Seibel Modern Manufacturing & Welding Corp.'s full OSHA safety record →
More inspections in this industry (NAICS 332999)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340040492.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.