OSHA Inspection: NAVY EXCHANGE

Issued

Dec 8, 2014

Abate by

Jan 5, 2015

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.36(f)(2): The capacity of an exit route may not decrease in the direction of exit route travel to the exit discharge:  Warehouse, east fire lane - On or about 10/30/14, storage of material reduced the width of the exit route.

Issued

Dec 8, 2014

Abate by

Jan 5, 2015

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.157(e)(3): Portable fire extinguishers were not subjected to an annual maintenance check:  a. Warehouse, near loading dock - On or about 10/30/14, a fire extinguisher was not subjected to an annual maintenance check.  b. Warehouse, hallway to store - On or about 10/30/14, a fire extinguisher was not subjected to an annual maintenance check.

Issued

Dec 8, 2014

Abate by

Jan 5, 2015

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.176(a): Where mechanical handling equipment was used, sufficient safe clearances were not allowed for aisles, at loading docks, through doorways or wherever turns or passage had to be made:  Warehouse - On or about 10/30/14, sufficient safe clearance in the aisles was not provided for pallet jacks.

Issued

Dec 8, 2014

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.178(a)(4): Modifications and additions which affect capacity and safe operation of powered industrial truck were performed by the employer without the manufacturer's prior written approval:  a. Forklift USN 446056 - On or about 10/30/14, plywood board was added to the forklift's roll cage.  b. Forklift USN 440318 - On or about 10/30/14, plywood board was added to the forklift's roll cage.

Issued

Dec 8, 2014

Abate by

Jan 5, 2015

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.178(a)(6): The employer did not ensure that all nameplates or markings were maintained in a legible condition:  a. Forklift USN 446056 - On or about 10/30/14, the forklift plates and markings were not maintained in a legible condition.  b. Forklift USN 440318 - On or about 10/30/14, the forklift plates and markings were not maintained in a legible condition.

Issued

Dec 8, 2014

Abate by

Jan 5, 2015

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.178(p)(1): Powered industrial truck(s) found to be in need of repair, defective, or in any way unsafe had not been  taken out of service until restored to safe operating condition:   a. Forklift USN 446056 - On or about 10/30/14, the forklift tires were worn down with minimal treads.  b. Forklift USN 440318 - On or about 10/30/14, the forklift tires were worn down with minimal treads.

Issued

Dec 8, 2014

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.305(g)(1)(iv)(A): Flexible cords and/or cables were used as a substitute for the fixed wiring of a structure:  Warehouse, north wall - On or about 10/30/14, an extension cord was used in lieu of permanent wiring to power an electric fan.

Issued

Dec 8, 2014

Abate by

Jan 5, 2015

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1926.102(a)(2): Eye and face protective equipment being used did not meet the requirements specified in Z 87.1-1968.  Warehouse, east wall - On or about 10/30/14, suitable eye protectors were not provided where machines or operations presented the hazard of flying objects.

Issued

Dec 8, 2014

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1926.403(b)(1): The employer did not ensure that electrical equipment is free from recognized hazards that are likely to cause death or serious physical harm to employees:   a. Warehouse, east wall - On or about 10/30/14, an electrical outlet cover was damaged and did not adequately protect employees  from inadvertent contact.  b. Warehouse, east wall - On or about 10/30/14, the connection between a tile cutter, mixer, and extension cord was exposed to wet conditions.