UNION, MO —
OSHA Inspection: WAHLE'S WOOD WORKS & MOULDING, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of WAHLE'S WOOD WORKS & MOULDING, INC. in #3 WILLIAMS DRIVE, UNION, MO 63084 (NAICS 321911). OSHA activity number 340067222.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- WAHLE'S WOOD WORKS & MOULDING, INC.
- Site address
- #3 WILLIAMS DRIVE
- City
- UNION
- State
- MO
- ZIP
- 63084
- Mailing
- #3 WILLIAMS DRIVE, UNION, MO 63084
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321911
- Employees
- 22
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.178 L04 III
- Issued
- Nov 21, 2014
- Abate by
- Dec 18, 2014
- Penalty
- Initial $1,600 · Current $1,120 Reduced
General-duty citation text
29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance shall be conducted at least once every three years: JOB SITE: #3 Williams Drive, Union, MO 63084, on or about 11/6/2014, at this facility, after reviewing the company's training documents, their last recorded evaluation of powered industrial operators was on March 2010.
Recent events (2)
- — I (S) $1120
- — Z (S) $1600
1910.212 A03 II
- Issued
- Nov 21, 2014
- Abate by
- Dec 18, 2014
- Penalty
- Initial $2,000 · Current $1,400 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): JOB SITE: #3 Williams Drive, Union, MO 63084, on or about 11/6/2014, at this facility, located in the production/assembly area, two Griggio table saws were not guarded to prevent employee(s) from having any part of their body in the danger zone during operating cycle(s).
Recent events (2)
- — I (S) $1400
- — Z (S) $2000
1910.213 R04
- Issued
- Nov 21, 2014
- Abate by
- Dec 18, 2014
- Penalty
- Initial $2,000 · Current $1,400 Reduced
General-duty citation text
29 CFR 1910.213(r)(4): Suitable guard(s) were not provided to reduce to a minimum the hazard due to the point of operation of Weinig Profimat 22N, Molder Machine: JOB SITE: #3 Williams Drive, Union, MO 63084, on or about 11/6/2014, at this facility, a Weinig Profimat 22N, Molder Machine, NO. 226-3404, the point of operation guard's interlock was disabled and inoperable.
Recent events (2)
- — I (S) $1400
- — Z (S) $2000
1910.215 A04
- Issued
- Nov 21, 2014
- Abate by
- Dec 18, 2014
- Penalty
- Initial $1,600 · Current $1,120 Reduced
General-duty citation text
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch: JOB SITE: #3 Williams Drive, Union, MO 63084, on or about 11/6/2014, at this facility, located in the machinist area, a Dayton Bench Grinder, MODEL: 2733L, S/N: 41882LF853, and a Delta Grinder S/N: KC8721, the work rest on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch.
Recent events (2)
- — I (S) $1120
- — Z (S) $1600
1910.215 B09
- Issued
- Nov 21, 2014
- Abate by
- Dec 18, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(b)(9): Guard for abrasive wheel machine where the operator stands in front of the machine was not constructed so that the peripheral protecting member could be adjusted to the constantly decreasing diameter of the wheel: JOB SITE: #3 Williams Drive, Union, MO 63084, on or about 11/6/2014, at this facility, located in the machinist area, a Dayton Bench Grinder, MODEL: 2733L, S/N: 41882LF853, and a Delta Grinder, S/N: KC8721, the guard in front of the machines were not constructed so that the peripheral protecting member could be adjusted to the constantly decreasing diameter of the wheel.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at Wahle'S Wood Works & Moulding, INC.
View Wahle'S Wood Works & Moulding, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 321911)
More inspections in MO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340067222.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.