JERICHO, NY —
OSHA Inspection: CTI CONSTRUCTION INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of CTI CONSTRUCTION INC. in 81 JERICHO TPKE, JERICHO, NY 11753 (NAICS 236220). OSHA activity number 340120674.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CTI CONSTRUCTION INC.
- Site address
- 81 JERICHO TPKE
- City
- JERICHO
- State
- NY
- ZIP
- 11753
- Mailing
- 30-50 WHITESTONE EXPRESSWAY, STE 101B, FLUSHING, NY 11354
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 236220
- Employees
- 10
- Ownership type
- A
Citations
6 citations on file for this inspection.
1926.102 A01
- Issued
- Dec 11, 2014
- Abate by
- Dec 17, 2014
- Penalty
- Initial $1,600 · Current $960 Reduced
General-duty citation text
29 CFR 1926.102(a)(1): Eye and face protective equipment were not used when machines or operations presented potential eye or face injury from physical, chemical, or radiation agents: a) Worksite, 81 Jericho Tpke., Jericho NY - An employee was using a Makita grinder to cut tile. The employee was not wearing eye protection when using the grinder; on or about 12/5/14. b) Worksite, 81 Jericho Tpke., Jericho NY - An employee was using a grinder to smooth the exterior of a commercial building. The employee was not wearing eye protection when using the grinder; on or about 12/5/14. Note: The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19.
Recent events (2)
- — I (S) $960
- — Z (S) $1600
1926.300 B01
- Issued
- Dec 11, 2014
- Abate by
- Dec 17, 2014
- Penalty
- Initial $1,600 · Current $960 Reduced
General-duty citation text
29 CFR 1926.300(b)(1): Power operated tool(s), designed to accommodate guards, were not equipped with such guards when in use: a) Worksite, 81 Jericho Tpke., Jericho NY - An employee was using a Makita grinder with a 4in blade to cut tile. The grinder was missing the guard; on or about 12/5/14. Note: The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19.
Recent events (2)
- — I (S) $960
- — Z (S) $1600
1926.451 B01
- Issued
- Dec 11, 2014
- Abate by
- Dec 17, 2014
- Penalty
- Initial $2,000 · Current $1,200 Reduced
General-duty citation text
29 CFR 1926.451(b)(1): Each platform on all working levels of scaffolds was not fully planked or decked between the front uprights and the guardrail supports as specified in paragraphs 1926.451(b)(1)(i)-(ii) a) Worksite, 81 Jericho Tpke., Jericho NY - Employees were working from the second tier of a fabricated frame scaffold approximately 13ft above the ground. The second tier had three planks installed; on or about 12/5/14. Note: The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19.
Recent events (2)
- — I (S) $1200
- — Z (S) $2000
1926.451 G01 VII
- Issued
- Dec 11, 2014
- Abate by
- Dec 17, 2014
- Penalty
- Initial $2,000 · Current $1,200 Reduced
General-duty citation text
29 CFR 1926.451(g)(1)(vii): Each employee on a scaffold, not otherwise specified in paragraphs (g)(1)(i) through (g)(1)(vi) of this section, more than 10 feet (3.1 m) above lower level was not protected from falls by the use of personal fall arrest systems or guardrail systems meeting the requirements of paragraph (g)(4) of this section. a) Worksite, 81 Jericho Tpke., Jericho NY - Employees were not protected from falling while working from the second tier of a fabricated frame scaffold approximately 13ft above the ground; on or about 12/5/14. Note: The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19.
Recent events (2)
- — I (S) $1200
- — Z (S) $2000
1926.1053 B13
- Issued
- Dec 11, 2014
- Abate by
- Dec 17, 2014
- Penalty
- Initial $2,000 · Current $1,200 Reduced
General-duty citation text
29 CFR 1926.1053(b)(13): The top or top step of a stepladder was used as a step: a) Worksite, 81 Jericho Tpke., Jericho NY - An employee was installing exterior high hat lighting while working from the top step of a step ladder; on or about 12/5/14. Note: The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19.
Recent events (2)
- — I (S) $1200
- — Z (S) $2000
1910.134 C02 I
- Issued
- Dec 11, 2014
- Abate by
- Dec 23, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(c)(2)(i): Respirator users were not provided with the information contained in Appendix D to 29 CFR 1910.134 when the employer determined that any voluntary respirator use was permissible: (Construction Reference 1926.103) a) Worksite, 81 Jericho Tpke., Jericho NY - Employees were wearing disposable filtering dust masks while working on the interior and exterior of a commercial building; on or about 12/5/14. Note: The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at CTI Construction INC.
View CTI Construction INC.'s full OSHA safety record →
More inspections in this industry (NAICS 236220)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340120674.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.