Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,194,531Inspections Most recent open 2026-08-11 Last loaded 2026-08-14

OSHA Inspection: UPS FREIGHT

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of UPS FREIGHT in 1700 TOWER DRIVE, KAUKAUNA, WI 54130 (NAICS 488510). OSHA activity number 340158732.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch UPS Freight for free Get an email when a new federal OSHA severe-injury report for UPS Freight is published. One employer, no account, unsubscribe in one click.
Establishment
UPS FREIGHT
Site address
1700 TOWER DRIVE
City
KAUKAUNA
State
WI
ZIP
54130
Mailing
1700 TOWER DRIVE, KAUKAUNA, WI 54130
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
Union (A)
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
488510
Employees
60
Ownership type
Private (A)

6 citations on file for this inspection.

1910.22 A01

Other-than-serious 1 instance 50 exposed
Issued
Apr 6, 2015
Abate by
Apr 15, 2015
Penalty
Initial $3,300 · Current $1,000 Reduced
29 CFR 1910.22(a)(1): All places of employment, passageways, storerooms or service rooms were not kept clean and orderly or in a sanitary condition:    a) On and at times prior to December 30, 2014 the dock floor was not kept in a clean and sanitized condition, especially at the southwest corner of the dock with pigeon dropping collected near the exit door.    b) On or about December 20, 2014 broken pallets and pieces of wood were present on floor at the west end of the building.
Recent events (2)
  • · I (O) $1000
  • · Z (S) $3300

1910.178 A04

Deleted Serious Gravity 5 17 instances 30 exposed
Issued
Apr 6, 2015
Abate by
Apr 28, 2015
Penalty
Initial $5,500 · Current $0 Reduced
29 CFR 1910.178(a)(4): Modifications and additions which affect capacity and safe operation of powered industrial truck were performed by the employer without the manufacturer's prior written approval:      c) On December 30, 2014 the employer did not provide the manufacturer's written approval for fork extensions and a barrel clamp attachment used on the Nissan LP forklift P1862.    d) On December 30, 2014 the employer did not provide the manufacturer's written approval for fork extensions and a barrel clamp attachment used on the Nissan LP forklift P1867.    e) On December 30, 2014 the employer did not provide the manufacturer's written approval for fork extensions and a barrel clamp attachment used on the Nissan LP forklift P827.    f) On December 30, 2014 the employer did not provide the manufacturer's written approval for fork extensions and a barrel clamp attachment used on the Nissan LP forklift P3741.
Recent events (2)
  • · I (S) $0
  • · Z (S) $5500

1910.178 A05

Deleted Serious Gravity 5 13 instances 30 exposed
Issued
Apr 6, 2015
Abate by
Apr 28, 2015
Penalty
Initial $0 · Current $0
29 CFR 1910.178(a)(5): The powered industrial truck was equipped with front-end attachments other than factory installed attachments, however the employer did not request that the truck be marked to identify the attachments and show the approximate weight of the truck and attachment combination at maximum elevation with load laterally centered:  a) On December 30, 2014 the nameplate on the Nissan LP forklift P1219 was not updated to reflect the fork extensions and the barrel clamp attachments used on the forklift.  b) On December 30, 2014 the nameplate on the Nissan LP Forklift P1861 was not updated to reflect the fork extensions and the barrel clamp attachments used on the forklift.   c) On December 30, 2014 the nameplate on the Nissan LP Forklift P1862 was not updated to reflect the fork extensions and the barrel clamp attachments used on the forklift.   d) On December 30, 2014 the nameplate on the Nissan LP Forklift P1867 was not updated to reflect the fork extensions and the barrel clamp attachments used on the forklift.   e) On December 30, 2014 the nameplate on the Nissan LP Forklift P827 was not updated to reflect the fork extensions and the barrel clamp attachments used on the forklift.   f) On December 30, 2014 the nameplate on the Nissan LP Forklift P3741 was not updated to reflect the fork extensions and the barrel clamp attachments used on the forklift.
Recent events (2)
  • · I (S) $0
  • · Z (S) $0

1910.303 H02 V B

Serious Gravity 5 1 instance 3 exposed
Issued
Apr 6, 2015
Abate by
Jun 15, 2015
Penalty
Initial $5,500 · Current $3,850 Reduced
29 CFR 1910.303(h)(2)(v)(B): 1910.303(h)(2)(v)(B): Suitable guards were not provided for equipment exposed to physical damage from vehicular traffic:     a) On or about December 30, 2014 the electrical transformer located in front of the exit door on the north side of the building was not protected from potential vehicular damage as the trailer was backed into the dock door within 3 feet of the unit.
Recent events (2)
  • · I (S) $3850
  • · Z (S) $5500

1910.178 Q01

Serious Gravity 5 5 instances 25 exposed
Issued
Apr 6, 2015
Abate by
Apr 15, 2015
Penalty
Initial $11,000 · Current $4,900 Reduced
29 CFR 1910.178(q)(1): Any power-operated industrial truck not in safe operating condition was not taken out of service, and/or repairs were not made by authorized personnel:    a) On and at times prior to December 30, 2014 the P1219 LP forklift was missing the cylinder tank set pin.      b) On and at times prior to December 30, 2014 the P1861 LP forklift was missing the cylinder tank set pin.      c) On and at times prior to December 30, 2014 the P1862 LP forklift did not have a secured set pin in place.      d) On and at times prior to December 30, 2014 the P1867 LP forklift had a damaged cylinder tank set pin.       e) On and at times prior to December 30, 2014 the P825 LP forklift had a damaged cylinder tank set pin.     The UPS Freight was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1910.178(q)(1) which was contained in OSHA inspection number 980950, citation number 02 , item number 001 and was affirmed as a final order on December 11, 2014, with respect to a workplace located at  1370 Goodyear, El Paso, TX 79936.    The UPS Freight was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1910.178(q)(1), which was contained in OSHA inspection number_315298026, citation number 01, item number 001 and was affirmed as a final order on June 29, 2011, with respect to a workplace located at 31 Sterling Road, North Billerica, MA 01862.
Recent events (2)
  • · I (S) $4900
  • · Z (R) $11000

1910.22 B01

Serious 4 instances 50 exposed
Issued
Apr 6, 2015
Abate by
Apr 28, 2015
Penalty
Initial $5,500 · Current $3,850 Reduced
29 CFR 1910.22(b)(1): Where mechanical handling equipment was used, sufficient safe clearances were not allowed for aisles, at loading docks, through doorways and wherever turns or passage had to be made:    a) On or about December 30, 2014 metal railing from existing overhead dock doors were protruding into the forklift path creating struck-by and unstable load hazards at dock doors such as but not limited to 5, 37, and 38.     b) On or about December 30, 2014 uneven concrete pavement in the yard in front of door 37 created a tripping hazard for employees exited their truck cab.    The UPS Freight was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1910.22(b)(1), which was contained in OSHA inspection number 315886697, citation number 01, item number 001 and was affirmed as a final order on February 17, 20112, with respect to a workplace located at 1601 Toronita St. York, PA 17402-9922.    The UPS Freight was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1910.22(b)(1), which was contained in OSHA inspection number 315496455, citation number 02, item number 001 and was affirmed as a final order on July 15, 2011, with respect to a workplace located at3250 East Kemper Rd. Sharonville, OH 45241.
Recent events (2)
  • · I (S) $3850
  • · Z (R) $5500

View UPS Freight's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 340158732.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.