FREDERIC, WI —
OSHA Inspection: APPLIED MOLDING TECHNOLOGIES, LLC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of APPLIED MOLDING TECHNOLOGIES, LLC. in 509 WISCONSIN AVENUE SOUTH, FREDERIC, WI 54837 (NAICS 333249). OSHA activity number 340177872.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- APPLIED MOLDING TECHNOLOGIES, LLC.
- Site address
- 509 WISCONSIN AVENUE SOUTH
- City
- FREDERIC
- State
- WI
- ZIP
- 54837
- Mailing
- 509 WISCONSIN AVENUE SOUTH, FREDERIC, WI 54837
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 333249
- Employees
- 15
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.110 F02 I
- Issued
- Jul 6, 2015
- Abate by
- Jul 15, 2015
- Penalty
- Initial $2,400 · Current $2,400
General-duty citation text
29 CFR 1910.110(f)(2)(i): LP gas container(s) in storage were not located so as to minimize exposure to excessive temperature rise, physical damage, or tampering by unauthorized persons: (a) Shipping/receiving area; A cylinder of liquid propane gas was not protected from physical damage.
Recent events (1)
- — Z (S) $2400
1910.303 G02 I
- Issued
- Jul 6, 2015
- Abate by
- Jul 20, 2015
- Penalty
- Initial $2,400 · Current $2,400
General-duty citation text
29 CFR 1910.303(g)(2)(i): Except as elsewhere required or permitted by Subpart S of Part 1910, live parts of electric equipment operating at 50 volts or more were not guarded against accidental contact by use of approved cabinets or other forms of approved enclosures or by any of the means identified in paragraphs (A), (B), (C), and (D) of 29 CFR 1910.303(g)(2)(i): (a) Press area; Protection was not provided for energized conductors by enclosure or elevation.
Recent events (1)
- — Z (S) $2400
1910.305 G01 IV A
- Issued
- Jul 6, 2015
- Abate by
- Jul 20, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(g)(1)(iv)(A): Flexible cords and/or cables were used as a substitute for the fixed wiring of a structure: (a) Press area; Individual conductor wires were used as a substitute for permanent wiring.
Recent events (1)
- — Z (S) $0
1910.178 L05
- Issued
- Jul 6, 2015
- Abate by
- Jul 27, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(5): The employer did not evaluate the competency of the operator who had previously received training appropriate to the truck and working conditions encountered: (a) Throughout the facility; Each forklift operator was not evaluated prior to operating forklifts.
Recent events (1)
- — Z (O) $0
More inspections at Applied Molding Technologies, LLC.
View Applied Molding Technologies, LLC.'s full OSHA safety record →
More inspections in this industry (NAICS 333249)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340177872.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.