SOUTH GRAFTON, MA —
OSHA Inspection: JD MILLWORK & CABINETS, INC.
Referral inspection · Health discipline
At a glance
On , OSHA opened a referral health inspection of JD MILLWORK & CABINETS, INC. in 7 DEPOT ST, SOUTH GRAFTON, MA 01560 (NAICS 337110). OSHA activity number 340184720.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- JD MILLWORK & CABINETS, INC.
- Site address
- 7 DEPOT ST
- City
- SOUTH GRAFTON
- State
- MA
- ZIP
- 01560
- Mailing
- PO BOX 6618 4 OLDE SURREY LN, MEDWAY, MA 02053
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 337110
- Employees
- 9
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.107 B09
- Issued
- Jun 3, 2015
- Abate by
- Jul 8, 2015
- Penalty
- Initial $2,800 · Current $1,400 Reduced
04301040106010801290
General-duty citation text
29 CFR 1910.107(b)(9): A clear space of not less than 3 feet on all sides was not kept free from storage or combustible construction: On or about 1/15/15, the spray booth was installed against a wall, and against wood, and flammable and combustible materials were within three feet of the sides of the spray booth, exposing employees to a fire hazard. Specific abatement documentation that this violation has been corrected must be provided within 10 days of the abatement in accordance with 29 CFR 1903.19(d)(1).
Recent events (2)
- — I (S) $1400
- — Z (S) $2800
1910.107 F03
- Issued
- Jun 3, 2015
- Abate by
- Jul 8, 2015
- Penalty
- Initial $0 · Current $0
04301040106010801290
General-duty citation text
29 CFR 1910.107(f)(3): Sprinklers protecting spraying areas were not kept as free from deposits as practical by cleaning daily if necessary. On or about 1/15/15, the sprinkler head in the spray booth was coated with paint, exposing employees to a fire hazard. Specific abatement documentation that this violation has been corrected must be provided within 10 days of the abatement in accordance with 29 CFR 1903.19(d)(1).
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.107 G02
- Issued
- Jun 3, 2015
- Abate by
- Jul 8, 2015
- Penalty
- Initial $0 · Current $0
04301040106010801290
General-duty citation text
29 CFR 1910.107(g)(2): All spraying areas were not kept as free from the accumulation of deposits of combustible residues as practical, with cleaning conducted daily if necessary: On or about 1/15/15, the spray booth had many layers of accumulation of deposits of combustible residues, exposing employees to a fire hazard. Specific abatement documentation that this violation has been corrected must be provided within 10 days of the abatement in accordance with 29 CFR 1903.19(d)(1).
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.134 C01
- Issued
- Jun 3, 2015
- Abate by
- Jul 31, 2015
- Penalty
- Initial $2,800 · Current $1,400 Reduced
04301040106010801290
General-duty citation text
29 CFR 1910.134(c)(1): A written respiratory protection program that included the provisions in 29 CFR 1910.134(c)(1)(i) - (ix) with worksite specific procedures was not established and implemented for required respirator use: On or about 1/15/15, a written respiratory protection program was not established and implemented for required respirator use for employees engaged in spray finishing. Specific abatement documentation that this violation has been corrected must be provided within 10 days of the abatement in accordance with 29 CFR 1903.19(d)(1).
Recent events (2)
- — I (S) $1400
- — Z (S) $2800
1910.133 A01
- Issued
- Jun 3, 2015
- Abate by
- Jul 8, 2015
- Penalty
- Initial $2,800 · Current $1,400 Reduced
1040106015602085T176
General-duty citation text
29 CFR 1910.133(a)(1): Protective eye equipment was not required where there was a reasonable probability of injury that could be prevented by such equipment: On or about 1/15/15, protective eye equipment was not required to be worn by employees engaged in spray finishing using injurious corrosive materials such as, but not limited to, Lenmar Catalyst 1A-622B. Specific abatement documentation that this violation has been corrected must be provided within 10 days of the abatement in accordance with 29 CFR 1903.19(d)(1).
Recent events (2)
- — I (S) $1400
- — Z (S) $2800
1910.151 C
- Issued
- Jun 3, 2015
- Abate by
- Jul 30, 2015
- Penalty
- Initial $0 · Current $0
1040106015602085T176
General-duty citation text
29 CFR 1910.151(c): Where employees were exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body were not provided within the work area for immediate emergency use: On or about 1/15/15, a suitable facility for quick flushing of the eyes was not provided within the work area for immediate emergency use by employees engaged in spray finishing using injurious corrosive materials such as, but not limited to, Lenmar Catalyst 1A-622B. Specific abatement documentation that this violation has been corrected must be provided within 10 days of the abatement in accordance with 29 CFR 1903.19(d)(1).
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.1200 E01
- Issued
- Jun 3, 2015
- Abate by
- Jul 30, 2015
- Penalty
- Initial $2,800 · Current $1,400 Reduced
04301040106010801290
General-duty citation text
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met: On or about 1/15/15, the employer did not develop and implement a written hazard communication program for materials such as, but not limited to, Lenmar Catalyst 1A-622B, used by employees engaged in spray finishing. Specific abatement documentation that this violation has been corrected must be provided within 10 days of the abatement in accordance with 29 CFR 1903.19(d)(1).
Recent events (2)
- — I (S) $1400
- — Z (S) $2800
More inspections at JD Millwork & Cabinets, INC.
View JD Millwork & Cabinets, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 337110)
More inspections in MA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340184720.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.