ANTHONY, KS —
OSHA Inspection: NANCE MANUFACTURING, INC.
Follow-up inspection · Safety discipline
At a glance
On , OSHA opened a follow-up safety inspection of NANCE MANUFACTURING, INC. in 396 W. HIGHWAY 2, ANTHONY, KS 67003 (NAICS 326291). OSHA activity number 340191808.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- NANCE MANUFACTURING, INC.
- Site address
- 396 W. HIGHWAY 2
- City
- ANTHONY
- State
- KS
- ZIP
- 67003
- Mailing
- 396 W. HIGHWAY 2 PO BOX 564, ANTHONY, KS 67003
What kind of inspection was it?
- Inspection type
- Follow-up (F)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 326291
- Employees
- 55
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.132 D02
- Issued
- Mar 2, 2015
- Abate by
- Mar 26, 2015
- Penalty
- Initial $2,100 · Current $1,470 Reduced
General-duty citation text
29 CFR 1910.132(d)(2): The employer did not verify that the required workplace hazard assessment has been performed through a written certification that identifies the workplace evaluated, the person certifying that the evaluation has been performed, the date(s) of the hazard assessment, and, which identifies the document as a certification of hazard assessment: A written certification of the workplace hazard assessment for personal protective equipment had not been developed while requiring employees to wear gloves, earplug, and safety glasses.
Recent events (2)
- — I (S) $1470
- — Z (S) $2100
1910.147 C07 I
- Issued
- Mar 2, 2015
- Abate by
- Mar 26, 2015
- Penalty
- Initial $2,100 · Current $1,470 Reduced
General-duty citation text
29 CFR 1910.147(c)(7)(i): The employer did not provide adequate training to ensure that the purpose and function of the energy control program was understood by employees: Affected and other employees had not been trained on the basic understanding/knowledge about the company policy on the purpose and function of the energy control program.
Recent events (2)
- — I (S) $1470
- — Z (S) $2100
1910.178 P01
- Issued
- Mar 2, 2015
- Abate by
- Mar 26, 2015
- Penalty
- Initial $2,100 · Current $1,470 Reduced
General-duty citation text
29 CFR 1910.178(p)(1): Powered industrial truck(s) found to be in need of repair, defective, or in any way unsafe had not been taken out of service until restored to safe operating condition(s): Employees were exposing to struck by and crushing hazard in that forklifts had operation issues. a) The Clark forklift had an inoperable light and backup audio alarm. b) The Hyster forklift had an inoperable light and backup audio alarm. c) The Toyota 934790 forklift had an inoperable light and horn. d) The Toyota 70720 forklift had an inoperable light.
Recent events (2)
- — I (S) $1470
- — Z (S) $2100
1910.212 A01
- Issued
- Mar 2, 2015
- Abate by
- Mar 26, 2015
- Penalty
- Initial $2,100 · Current $1,470 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): Machine guarding was not provided to protect operator(s) and other employees from hazards created by rotating parts, and/or flying chips and sparks: Maintenance Shop area - Employees were exposed to hazards in that the machine guarding was not provided for the Monarch Lathe machine to protect operators and other employees from hazards created by rotating parts.
Recent events (2)
- — I (S) $1470
- — Z (S) $2100
1910.213 I01
- Issued
- Mar 2, 2015
- Abate by
- Mar 26, 2015
- Penalty
- Initial $2,100 · Current $1,470 Reduced
General-duty citation text
29 CFR 1910.213(i)(1): Non-working portion(s) of the saw blade were not enclosed or guarded: Maintenance Shop area - Employees were exposed to hazards in that the unused portions of the blade on the Sears Craftsman 12 Two Speed Band Saw were not guarded.
Recent events (2)
- — I (S) $1470
- — Z (S) $2100
More inspections at Nance Manufacturing, INC.
View Nance Manufacturing, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 326291)
More inspections in KS
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340191808.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.