LINCOLN, IL —
OSHA Inspection: PRECISION PRODUCTS, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of PRECISION PRODUCTS, INC. in 316 LIMIT ST., LINCOLN, IL 62656 (NAICS 333112). OSHA activity number 340192095.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- PRECISION PRODUCTS, INC.
- Site address
- 316 LIMIT ST.
- City
- LINCOLN
- State
- IL
- ZIP
- 62656
- Mailing
- 316 LIMIT ST., LINCOLN, IL 62656
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 333112
- Employees
- 160
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.212 A03 II
- Issued
- May 13, 2015
- Abate by
- May 19, 2015
- Penalty
- Initial $4,500 · Current $2,250 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): An employee working in the Fabrication Department was exposed to the hazard of getting their hands/fingers caught in the point of operation on the Chicago 25 Ton Press Brake, Model Number 265, Serial Number L-1719125. The employer failed to ensure the use of the light curtains to protect the point of operation.
Recent events (2)
- — I (S) $2250
- — Z (S) $4500
1910.217 C01 I
- Issued
- May 13, 2015
- Abate by
- Jun 30, 2015
- Penalty
- Initial $6,300 · Current $3,150 Reduced
General-duty citation text
29 CFR 1910.217(c)(1)(i): The employer did not provide and ensure the usage of point of operation guards or properly applied point of operation devices on every operation performed on mechanical power press(es): Employees working in the Fabrication Department were exposed to getting their hands/fingers caught in the point of operation because: a. the point of operation guards on the Verson 60 Ton Flat Bed Part Revolution Power Press, Machine Number 150-C2-60T, Serial Number 122502, did not prevent entry of hands or fingers in the point of operation or conform to the maximum permissible openings allowed by the standard. b. the point of operation guards on the Pressroom Equipment Inc. Part Revolution Power Press, Model Number AF-2, Serial Number 880340, did not prevent entry of hands or fingers in the point of operation or conform to the maximum permissible openings allowed by the standard.
Recent events (2)
- — I (S) $3150
- — Z (S) $6300
1910.217 C03 VII D
- Issued
- May 13, 2015
- Abate by
- Jun 30, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.217(c)(3)(vii)(d): Two hand controls used with mechanical power press(es) were not fixed in position so that only a supervisor or safety engineer was capable of relocating the controls: Employees were exposed to the hazard of getting their hands/fingers caught in the point of operation because: a. the two hand controls on the Verson 60 Ton Flat Bed Part Revolution Power Press, Machine Number 150-C2-60T, Serial Number 122502, were not secured at an appropriate distance. b. the two hand controls on the Pressroom Equipment Inc. Part Revolution Power Press, Model Number AF2, Serial Number 880340, were not secured at an appropriate distance.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.305 J04 V
- Issued
- May 13, 2015
- Abate by
- May 19, 2015
- Penalty
- Initial $2,700 · Current $1,350 Reduced
General-duty citation text
29 CFR 1910.305(j)(4)(v): Disconnecting means for the motors, motor circuits and controllers were not readily accessible: An employee working in the Fabrication Department was exposed to injury because the disconnect switches for the lights in the Welding Department and the Rousselle Part Revolution Power Press, Serial Number 16758, Model Number 6E, were not readily accessible.
Recent events (2)
- — I (S) $1350
- — Z (S) $2700
More inspections at Precision Products, INC.
View Precision Products, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 333112)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340192095.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.