HERMANN, MO —
OSHA Inspection: BOONE VALLEY FOREST PRODUCTS, INC.
Follow-up inspection · Health discipline
At a glance
On , OSHA opened a follow-up health inspection of BOONE VALLEY FOREST PRODUCTS, INC. in 2054 EPPLE ROAD, HERMANN, MO 65041 (NAICS 321113). OSHA activity number 340196344.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- BOONE VALLEY FOREST PRODUCTS, INC.
- Site address
- 2054 EPPLE ROAD
- City
- HERMANN
- State
- MO
- ZIP
- 65041
- Mailing
- P.O. BOX 193, CHESTERFIELD, MO 63006
What kind of inspection was it?
- Inspection type
- Follow-up (F)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321113
- Employees
- 6
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.147 C01
- Issued
- Apr 1, 2015
- Abate by
- Apr 27, 2015
- Penalty
- Initial $2,000 · Current $1,400 Reduced
General-duty citation text
29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative: JOB SITE: 2054 Epple Road, Hermann, MO 65041, on or about 1/22/2015, at this facility, the employer failed to establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative.
Recent events (2)
- — I (S) $1400
- — Z (S) $2000
1910.147 C08
- Issued
- Apr 1, 2015
- Abate by
- Apr 27, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(8): Lockout or tagout was not performed only by the authorized employees who are performing the servicing or maintenance: JOB SITE: 2054 Epple Road, Hermann, MO 65041, on or about 1/22/2015, at this facility, lockout or tagout procedures were not being performed by those employees performing the servicing or maintenance of equipment.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.303 B02
- Issued
- Apr 1, 2015
- Abate by
- Apr 27, 2015
- Penalty
- Initial $2,000 · Current $1,400 Reduced
General-duty citation text
29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling: JOB SITE: 2054 Epple Road, Hermann, MO 65041, on or about 1/22/2015, at this facility, located in the saw mill, on the head saw, Romex wire was used a flexible cord with an electrical plug to power overhead lighting. The workers were exposed to an electrical hazard.
Recent events (2)
- — I (S) $1400
- — Z (S) $2000
1910.305 B02 I
- Issued
- Apr 1, 2015
- Abate by
- Apr 27, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(b)(2)(i): Each outlet box in completed installations did not have a cover, faceplate, or fixture canopy: JOB SITE: 2054 Epple Road, Hermann, MO 65041, on or about 1/22/2015, at this facility, located in the saw mill, on the east wall of the mill, an electrical box with live wires was open, approximately 63 inches above ground level. The workers were exposed to an electrical hazard.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.305 G02 II
- Issued
- Apr 1, 2015
- Abate by
- Apr 27, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(g)(2)(ii): No. 14 and larger cord was not repaired so that the repair retains the insulation, outer sheath properties, and usage characteristics of the cord being spliced: JOB SITE: 2054 Epple Road, Hermann, MO 65041, on or about 1/22/2015, at this facility, located in the saw mill a Romex wire was used as flexible cord to power overhead lighting, the cord was not repaired so that the repair retains the insulation, outer sheath properties. The workers were exposed to an electrical hazard.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at Boone Valley Forest Products, INC.
View Boone Valley Forest Products, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 321113)
More inspections in MO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340196344.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.