Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: MATHEWS FRAMING

Unprogrammed Related inspection · Safety discipline

On , OSHA opened an unprogrammed Related safety inspection of MATHEWS FRAMING in 235 SOUTH 11TH STREET, LINCOLN, NE 68501 (NAICS 238130). OSHA activity number 340199850.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Mathews Framing — free Get an email when a new federal OSHA severe-injury report for Mathews Framing is published. One employer, no account, unsubscribe in one click.
Establishment
MATHEWS FRAMING
Site address
235 SOUTH 11TH STREET
City
LINCOLN
State
NE
ZIP
68501
Mailing
33 SMITH DRIVE, TWIN CITY, GA 30471
Inspection type
Unprogrammed Related (G)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
5
Ownership type
A

6 citations on file for this inspection.

1926.451 B02

Serious Gravity 5 1 instance 1 exposed
Issued
Feb 3, 2015
Abate by
Mar 9, 2015
Penalty
Initial $2,400 · Current $2,400
29 CFR 1926.451(b)(2):   Scaffold platforms and walkways were not at least 18 inches wide:  Work site located at 235 South 11th Street, Lincoln, NE, 6th Floor:  An employee was observed working from a carpenter bracket scaffold which had a platform less than 18 inches wide.  The platform measured 11 inches and was made up of two 2X6 planks.      Abatement certification is required for this violation.  The abatement certification sheet is enclosed with the citations.
Recent events (1)
  • — Z (S) $2400

1926.451 F07

Serious Gravity 5 1 instance 4 exposed
Issued
Feb 3, 2015
Abate by
Mar 9, 2015
Penalty
Initial $2,400 · Current $2,400
29 CFR 1926.451(f)(7):   Scaffolds were not erected, moved, dismantled, or altered, by trained and experienced employees under the supervision and direction of a competent person qualified in scaffold erection, moving, dismantling or alteration.  Such activities were not performed only by experienced and trained employees selected for such work by the competent person.  Work site located at 235 South 11th Street, Lincoln, NE, 6th Floor:  An employee was exposed to fall hazards due to the incorrect erection of a carpenter bracket scaffold.  A person meeting the definition of competent person was not present when the scaffold was erected.      Abatement certification is required for this violation.  The abatement certification sheet is enclosed with the citations.
Recent events (1)
  • — Z (S) $2400

1926.454 A

Serious Gravity 5 1 instance 4 exposed
Issued
Feb 3, 2015
Abate by
Mar 9, 2015
Penalty
Initial $1,600 · Current $1,600
29 CFR 1926.454(a):   The employer did not have each employee who performed work while on a scaffold trained by a person qualified in the subject matter to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards.      Work site located at 235 South 11th Street, Lincoln, NE, 6th Floor as well as throughout the company:  Employees working a scaffold had not received training on the relevant portions of Subpart L, Scaffolding.  Without training on the requirements of the standard it is not possible for the employees to ensure that they are working from a scaffold that has been erected correctly.       Abatement certification is required for this violation.  The abatement certification sheet is enclosed with the citations.
Recent events (1)
  • — Z (S) $1600

1926.1053 A08

Serious Gravity 5 1 instance 1 exposed
Issued
Feb 3, 2015
Abate by
Mar 9, 2015
Penalty
Initial $1,600 · Current $1,600
29 CFR 1926.1053(a)(8):   A metal spreader or locking device was not provided on each stepladder to hold the front and back sections in an open position when the ladder was being used:   Work site located at 235 South 11th Street, Lincoln, NE, 6th Floor:  A 6 foot-self supporting ladder did not have the metal spreader or locking device engaged.  The ladder was leaned against a carpenter bracket scaffold and was being used for access.      Abatement certification is required for this violation.  The abatement certification sheet is enclosed with the citations.
Recent events (1)
  • — Z (S) $1600

1926.1053 B13

Serious Gravity 5 1 instance 1 exposed
Issued
Feb 3, 2015
Abate by
Mar 9, 2015
Penalty
Initial $1,600 · Current $1,600
29 CFR 1926.1053(b)(13):   The top or top step of a stepladder was used as a step:  Work site located at 235 South 11th Street, Lincoln, NE, 6th Floor:  An employee was observed using the top step of a 6 foot A-frame ladder while performing overhead work.  This exposed the employe to a 58 fall.      Abatement certification is required for this violation.  The abatement certification sheet is enclosed with the citations.
Recent events (1)
  • — Z (S) $1600

1926.1060 A

Serious Gravity 5 1 instance 4 exposed
Issued
Feb 3, 2015
Abate by
Mar 9, 2015
Penalty
Initial $2,000 · Current $2,000
29 CFR 1926.1060(a):   The employer did not provide a training program for each employee using ladders and stairways, as necessary, which would enable each employee to recognize hazards related to ladders and stairways and train each employee in the procedures to be followed to minimize these hazards.   Work site located at 235 South 11th Street, Lincoln, NE, 6th Floor and throughout the company:  Employees had not been trained on the proper use of portable ladders.       Abatement certification is required for this violation.  The abatement certification sheet is enclosed with the citations.
Recent events (1)
  • — Z (S) $2000

View Mathews Framing's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340199850.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.