BUFORD, GA —
OSHA Inspection: CARLOS MARIO AGUILAR VELASCO
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of CARLOS MARIO AGUILAR VELASCO in THOMPSON CROSSING LOT 116A, BUFORD, GA 30518 (NAICS 238130). OSHA activity number 340215656.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CARLOS MARIO AGUILAR VELASCO
- Site address
- THOMPSON CROSSING LOT 116A
- City
- BUFORD
- State
- GA
- ZIP
- 30518
- Mailing
- 1385 SOUTHERN WOODS DR APT. G, TUCKER, GA 30084
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- Employees
- 4
- Ownership type
- A
Citations
5 citations on file for this inspection.
1926.304 D
- Issued
- Mar 19, 2015
- Abate by
- Apr 14, 2015
- Penalty
- Initial $2,400 · Current $2,400
General-duty citation text
29 CFR 1926.304(d): Portable, power-driven circular saw(s) were not equipped with a guard above and below the base plate or shoe: On or about January 26, 2015: a) An employee was exposed to amputation hazards while using a circular saw that had its guard held back by a block of wood prohibiting the guard from retracting when the tool is withdrawn after cutting.
Recent events (1)
- — Z (S) $2400
1926.404 F06
- Issued
- Mar 19, 2015
- Abate by
- Apr 14, 2015
- Penalty
- Initial $1,200 · Current $1,200
General-duty citation text
29 CFR 1926.404(f)(6): The path to ground from circuits, equipment, or enclosures was not permanent and continuous: On or about January 26, 2015: a) An employee was exposed to electrical shock or burn while using a flexible cord to power a circular saw that was missing the grounding pin.
Recent events (1)
- — Z (S) $1200
1926.405 G02 IV
- Issued
- Mar 19, 2015
- Abate by
- Apr 14, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.405(g)(2)(iv): Flexible cords were not connected to devices and fittings so that strain relief is provided to prevent pull from being directly transmitted to joints or terminal screws: On or about January 26, 2015: a) a) An employee was exposed to electrical shock or burn while using a flexible cord to power a circular saw that was missing the strain relief.
Recent events (1)
- — Z (S) $0
1926.451 G01
- Issued
- Mar 19, 2015
- Abate by
- Apr 14, 2015
- Penalty
- Initial $2,000 · Current $2,000
General-duty citation text
29 CFR 1926.451(g)(1): Employees on scaffolds more than 10 feet (3.1 m) above a lower level were not protected from falling to that lower level by fall protection established in paragraphs (g)(1)(i)-(vii) of this section: On or about January 26, 2015: a) An employee working from a job made scaffold system was exposed to a fall hazard of approximately 18 feet when the employer failed to ensure fall protection measures were in place.
Recent events (1)
- — Z (S) $2000
1926.501 B13
- Issued
- Mar 19, 2015
- Abate by
- Apr 14, 2015
- Penalty
- Initial $2,000 · Current $2,000
General-duty citation text
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b): On or about January 26, 2015: a) Employee performing residential construction work was exposed to fall hazards of approximately 20.2 feet without the use of fall protection systems.
Recent events (1)
- — Z (S) $2000
More inspections at Carlos Mario Aguilar Velasco
View Carlos Mario Aguilar Velasco's full OSHA safety record →
More inspections in this industry (NAICS 238130)
More inspections in GA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340215656.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.