Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: M & M ONE FRAMING LLC

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of M & M ONE FRAMING LLC in 102 REDTAIL COVE, LITTLE ROCK, AR 72211 (NAICS 238130). OSHA activity number 340218791.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch M & M ONE Framing LLC — free Get an email when a new federal OSHA severe-injury report for M & M ONE Framing LLC is published. One employer, no account, unsubscribe in one click.
Site address
102 REDTAIL COVE
City
LITTLE ROCK
State
AR
ZIP
72211
Mailing
3804 WELDON AVENUE, LITTLE ROCK, AR 72204
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
5
Ownership type
A

3 citations on file for this inspection.

1926.502 D16 III

Serious Gravity 10 1 instance 1 exposed
Issued
May 20, 2015
Abate by
Jun 11, 2015
Penalty
Initial $2,800 · Current $2,800
29 CFR 1926.502(d)(16)(iii):   Personal fall arrest systems, when stopping a fall, were not rigged such that an employee could not free fall more than 6 feet (1.8 m) nor contact any lower level:   An employee's personal fall arrest systems (PFAS) was improperly positioned. The rope grab was positioned on the lifeline in such a manner that the employee would free fall more than 6 feet (1.8 m) to the unfinished ground below.
Recent events (1)
  • — Z (S) $2800

1926.502 D17

Serious Gravity 10 1 instance 1 exposed
Issued
May 20, 2015
Abate by
Jun 11, 2015
Penalty
Initial $0 · Current $0
29 CFR 1926.502(d)(17): The attachment point of the body harness was not located in the center of the wearer's back near shoulder level, or above the wearer's head:  An employee on a steep residential roof exposed to 18 feet fall from elevation hazard did not have his personal fall arrest system (PFAS) properly donned.
Recent events (1)
  • — Z (S) $0

1926.503 A01

Serious Gravity 5 1 instance 4 exposed
Issued
May 20, 2015
Abate by
Jun 11, 2015
Penalty
Initial $2,400 · Current $2,400
29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards:  An employee donned with a body harness while working on a steep residential roof was exposed to 18 feet fall from height elevation hazard and had not been trained to recognize the hazards associated with the use of the equipment.
Recent events (1)
  • — Z (S) $2400

View M & M ONE Framing LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340218791.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.