PORTAGE, WI —
OSHA Inspection: PENDA CORPORATION
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of PENDA CORPORATION in 2344 W. WISCONSIN STREET, PORTAGE, WI 53901 (NAICS 423120). OSHA activity number 340220938.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- PENDA CORPORATION
- Site address
- 2344 W. WISCONSIN STREET
- City
- PORTAGE
- State
- WI
- ZIP
- 53901
- Mailing
- 2344 W. WISCONSIN STREET, PORTAGE, WI 53901
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 423120
- Employees
- 325
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.147 C04 II
- Issued
- Jul 17, 2015
- Penalty
- Initial $4,400 · Current $4,400
General-duty citation text
29 CFR 1910.147(c)(4)(ii): The energy control procedures did not clearly and specifically outline the scope, purpose, authorization, rules, and techniques to be utilized for the control of hazardous energy, including, but not limited to Items of this section: On or about January 27, 2015, a procedure for the locking out of the flipper table equipped with air pressure was not written which included the steps of individually locking out the electrical and pneumatic power sources.
Recent events (2)
- — I (S) $4400
- — Z (S) $4400
1910.147 C07 I
- Issued
- Jul 17, 2015
- Penalty
- Initial $4,400 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(c)(7)(i): The training program of the employer did not include all the training elements listed under Items A-C of 29 CFR 1910.147(c)(7)(i): On or about January 27, 2015, employees in the Extrusion Department operating flipper tables were not trained on the purpose and use of the energy control procedure for locking out the flipper tables' in-turning rollers when tailgate sheets are not advancing through the machine to drop on the stacker below.
Recent events (2)
- — I (S) $0
- — Z (S) $4400
1910.147 C06 I
- Issued
- Jul 17, 2015
- Penalty
- Initial $4,400 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed: On or about January 27, 2015, the employer had not conducted a review of the lockout program and procedures to determine if the requirements of the standard were being followed for the flipper tables in Extrusion.
Recent events (2)
- — I (S) $0
- — Z (S) $4400
1910.147 D03
- Issued
- Jul 17, 2015
- Penalty
- Initial $4,400 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(d)(3): All energy isolating devices that were needed to control the energy to the machine or equipment were not physically located and operated in such a manner as to isolate the machine or equipment from the energy source(s) On or about January 27, 2015, flipper table #2 in the Extrusion Department was not isolated by disconnecting the electrical power cord when unjamming tailgate workpiece(s) from the in-turning rollers.
Recent events (2)
- — I (S) $0
- — Z (S) $4400
1910.212 A03 II
- Issued
- Jul 17, 2015
- Penalty
- Initial $0 · Current $4,400
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s: On or about January 27, 2015, the in-turning rollers of flipper tables #1 and #2 were not guarded.
Recent events (2)
- — I (S) $4400
- — Z (S) $0
More inspections at Penda Corporation
View Penda Corporation's full OSHA safety record →
More inspections in this industry (NAICS 423120)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340220938.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.