ELK MOUND, WI —
OSHA Inspection: J.D. MILLER & SONS, LLC
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of J.D. MILLER & SONS, LLC in N 7102 STATE RD 40, ELK MOUND, WI 54739 (NAICS 423510). OSHA activity number 340280593.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- J.D. MILLER & SONS, LLC
- Site address
- N 7102 STATE RD 40
- City
- ELK MOUND
- State
- WI
- ZIP
- 54739
- Mailing
- N 7102 STATE RD 40, ELK MOUND, WI 54739
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 423510
- Employees
- 8
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.212 A03 II
- Issued
- Jul 17, 2015
- Abate by
- Jul 28, 2015
- Penalty
- Initial $2,800 · Current $1,960 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): (a) Shed; On or about February 03, 2015; point-of-operation guarding was not provided for a pyramid roll forming machine.
Recent events (2)
- — I (S) $1960
- — Z (S) $2800
1910.219 C04 I
- Issued
- Jul 17, 2015
- Abate by
- Jul 31, 2015
- Penalty
- Initial $2,000 · Current $1,400 Reduced
General-duty citation text
29 CFR 1910.219(c)(4)(i): Unguarded projecting shaft end(s) did not present a smooth edge and end and projected more than one half the diameter of the shaft: (a) Shed; On or about February 03, 2015, the end of an unguarded horizontal shaft extended more than half its diameter beyond the roll forming machine.
Recent events (2)
- — I (S) $1400
- — Z (S) $2000
1910.219 D01
- Issued
- Jul 17, 2015
- Abate by
- Jul 31, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): (a) Shed; On or about February 03, 2015; Power transmission pulleys on a powered roll forming machine were not guarded.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.219 E03 I
- Issued
- Jul 17, 2015
- Abate by
- Jul 31, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(e)(3)(i): Vertical or inclined belt(s) were not enclosed by guard(s) conforming to the requirements specified at 29 CFR 1910.219(m) and (o): (a) Shed; On or about February 03, 2015; Power transmission belt on a powered roll forming machine was not guarded.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at J.D. Miller & Sons, LLC
View J.D. Miller & Sons, LLC's full OSHA safety record →
More inspections in this industry (NAICS 423510)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340280593.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.