MILFORD, DE —
OSHA Inspection: GENERAL DOORS CORPORATION
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of GENERAL DOORS CORPORATION in 700 MCCOLLEY STREET, MILFORD, DE 19963 (NAICS 321911). OSHA activity number 340324870.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- GENERAL DOORS CORPORATION
- Site address
- 700 MCCOLLEY STREET
- City
- MILFORD
- State
- DE
- ZIP
- 19963
- Mailing
- 1 MONROE STREET P.O. BOX 205, BRISTOL, PA 19007
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321911
- Employees
- 11
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.147 C04 I
- Issued
- Aug 7, 2015
- Abate by
- Sep 2, 2015
- Penalty
- Initial $2,800 · Current $2,100 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: a) In the shop - Employer did not have procedures for employees performing servicing and maintenance activities on equipment including, but not limited to, ripsaw, trimmer saw, CKL molder, compressor, and CNC router, which had multiple energy sources such as pneumatic, hydraulic, and electric. Conditions identified on or about February 10, 2015.
Recent events (2)
- — I (S) $2100
- — Z (S) $2800
1910.147 C06 I
- Issued
- Aug 7, 2015
- Abate by
- Sep 2, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer shall conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirements of this standard are being followed: a) In the Shop - The employer did not conduct a periodic inspection as required. Periodic inspection documentation was not maintained, available or provided when requested, on or about February 10, 2015.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.151 C
- Issued
- Aug 7, 2015
- Abate by
- Aug 19, 2015
- Penalty
- Initial $2,800 · Current $1,650 Reduced
General-duty citation text
29 CFR 1910.151(c): 29 CFR 1910.151(c): Where employees were exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body were not provided within the work area for immediate emergency use: a) In the Shop - Glue area (NE side) - On or about February 10, 2015, the employer failed to ensure suitable emergency eyewash facilities were available for employees working with hazardous and corrosive materials such as but not limited to: K-4 Liquid Catalyst, Tan W/B Primer, adhesives, and cleansers. The eyewash did not have a suitable lever/handle for emergency operation.
Recent events (2)
- — I (S) $1650
- — Z (S) $2800
1904.39 A02
- Issued
- Aug 7, 2015
- Penalty
- Initial $1,000 · Current $750 Reduced
General-duty citation text
29 CFR 1904.39(a)(2): Within twenty-four (24) hours after the in-patient hospitalization of one or more employees or an employee's amputation or an employee's loss of an eye, as a result of a work-related incident, you must report the in-patient hospitalization, amputation, or loss of an eye to OSHA. a) In the Shop - Department 140 - The employer did not report an amputation to OSHA within twenty-four (24) hours of January 20, 2015, the date of employee injury. The report was received on or about February 6, 2015.
Recent events (2)
- — I (O) $750
- — Z (O) $1000
1910.178 L04 III
- Issued
- Aug 7, 2015
- Abate by
- Sep 2, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance was not being conducted at least once every three years: a) In the Shop - The employer did not ensure the employees were evaluated at least once every three years. The last documented evaluation was in 2007. Conditions identified on or about February 10, 2015.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.1200 E01
- Issued
- Aug 7, 2015
- Abate by
- Sep 24, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met: a) In the Shop - The employer did not have a written hazard communication program for the site. The employees use various chemicals (hazardous & corrosive) in the manufacturing process. Conditions identified on or about February 10, 2015.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at General Doors Corporation
View General Doors Corporation's full OSHA safety record →
More inspections in this industry (NAICS 321911)
More inspections in DE
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340324870.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.