HUDSON, FL —
OSHA Inspection: B.E.T.-ER MIX, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of B.E.T.-ER MIX, INC. in 9301 DENTON AVE, HUDSON, FL 34667 (NAICS 327390). OSHA activity number 340408384.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- B.E.T.-ER MIX, INC.
- Site address
- 9301 DENTON AVE
- City
- HUDSON
- State
- FL
- ZIP
- 34667
- Mailing
- 9301 DENTON AVE, HUDSON, FL 34667
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 327390
- Employees
- 170
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.212 A03 II
- Issued
- May 22, 2015
- Penalty
- Initial $6,300 · Current $3,780 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): a. In the block making plant, employees were exposed to a struck by hazard, in that ,on Besser Block maker #2 the barrier guard was pushed back to allow employees entry into the zone of danger beside the plunger of the machine during operation, on or about 0/27/2015.
Recent events (2)
- — I (S) $3780
- — Z (S) $6300
1910.215 A04
- Issued
- May 22, 2015
- Penalty
- Initial $4,500 · Current $2,700 Reduced
General-duty citation text
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch: a. In the machine shop, an employee was exposed to a struck by hazard, in that, during the use of the 8 inch abrasive wheel model # 1DS-250 the work rest was 3 inches from the wheel, on or about 02/12/2015
Recent events (2)
- — I (S) $2700
- — Z (S) $4500
1910.219 D01
- Issued
- May 22, 2015
- Penalty
- Initial $4,500 · Current $2,700 Reduced
General-duty citation text
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o) a. In the block plant, employees were exposed to a caught in hazard, in that there was no guard on the pulleys of Besser #2 block making machine. The pulleys were 4 feet 4 inches from the floor, on or about 02/12/2015.
Recent events (2)
- — I (S) $2700
- — Z (S) $4500
1910.132 D02
- Issued
- May 22, 2015
- Abate by
- Jul 10, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.132(d)(2): The employer did not verify, through a written certification, that the required workplace hazard assessment had been performed: a. At the establishment, the employer did not have a written assessment of the workplace to determine if hazards were present, or were likely to be present, which necessitated the use of personal protective equipment (PPE), on or about 02/12/2015.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at B.E.T.-Er MIX, INC.
View B.E.T.-Er MIX, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 327390)
More inspections in FL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340408384.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.