SURING, WI —
OSHA Inspection: DIMENSION LUMBER COMPANY, LLC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of DIMENSION LUMBER COMPANY, LLC in 11852 HWY 32 EAST, SURING, WI 54174 (NAICS 321113). OSHA activity number 340429182.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- DIMENSION LUMBER COMPANY, LLC
- Site address
- 11852 HWY 32 EAST
- City
- SURING
- State
- WI
- ZIP
- 54174
- Mailing
- 11852 HWY 32 EAST, SURING, WI 54174
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321113
- Employees
- 27
- Ownership type
- A
Citations
8 citations on file for this inspection.
1910.178 A04
- Issued
- Apr 29, 2015
- Abate by
- Jun 18, 2015
- Penalty
- Initial $2,975 · Current $2,083 Reduced
General-duty citation text
29 CFR 1910.178(a)(4): Modifications and additions which affect capacity and safe operation of powered industrial truck were performed by the employer without the manufacturer's prior written approval: Maintenance employees utilized an unapproved personnel platform on a forklift to work at elevations of 16 feet or higher.
Recent events (2)
- — I (S) $2082.5
- — Z (S) $2975
1910.178 Q06
- Issued
- Apr 29, 2015
- Penalty
- Initial $2,529 · Current $1,770 Reduced
General-duty citation text
29 CFR 1910.178(q)(6): Industrial trucks were altered by the elimination of any parts: A Nissan LP Powered forklift had the seatbelt that was provided from the factory removed.
Recent events (2)
- — I (S) $1770.3
- — Z (S) $2529
1910.265 C04 IV
- Issued
- Apr 29, 2015
- Penalty
- Initial $2,975 · Current $2,083 Reduced
General-duty citation text
29 CFR 1910.265(c)(4)(iv): Elevated platform(s), more than 6 feet from floor level, were not provided with both a standard railing and a toe board: (a) Two elevated platforms located on the dust cyclone were not provided standard railings and toe boards, exposing employees to fall hazards of greater than six feet. (b) A log deck located by the Scrag saw did not have adequate railings to protect employees oiling spindles, exposing them to fall hazards of greater than six feet.
Recent events (2)
- — I (S) $2082.5
- — Z (S) $2975
1910.265 C04 VI
- Issued
- Apr 29, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.265(c)(4)(vi): Walkway(s) and stairway(s), with standard handrails, were not provided where required in elevated and hazardous locations: A walkway alongside a conveyor transferring wood from the edger to the trim saw was not provided standard handrails to keep employees from potentially falling into the hazardous area.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1904.32 B06
- Issued
- Apr 29, 2015
- Penalty
- Initial $595 · Current $0 Reduced
General-duty citation text
29 CFR 1904.32(b)(6): 29 CFR 1904.32(b)(6) The annual summary was not posted no later than February 1 of the year following the year covered by the records, and kept in place until April 30: The annual summary for the facility was not posted at the time of inspection on 2/26/15.
Recent events (2)
- — I (O) $0
- — Z (O) $595
1910.147 C06 II
- Issued
- Apr 29, 2015
- Abate by
- Jun 18, 2015
- Penalty
- Initial $595 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(c)(6)(ii): The employer did not certify that periodic inspections of the energy control procedures had been performed: The employer did not certify the periodic inspections that were being performed on an annual basis.
Recent events (2)
- — I (O) $0
- — Z (O) $595
1910.303 B02
- Issued
- Apr 29, 2015
- Penalty
- Initial $595 · Current $0 Reduced
General-duty citation text
29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling: A metallic outlet box (handy box) was not installed in accordance with the UL identifier QCIT which states the box shall be mounted in or on a surface. The handy box was not mounted to a surface and was suspended in the air by rigid conduit.
Recent events (2)
- — I (O) $0
- — Z (O) $595
1910.305 B02 I
- Issued
- Apr 29, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(b)(2)(i): Each outlet box in completed installations did not have a cover, faceplate, or fixture canopy: A pull-box located on the ceiling of the facility was not provided a cover.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Dimension Lumber Company, LLC
View Dimension Lumber Company, LLC's full OSHA safety record →
More inspections in this industry (NAICS 321113)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340429182.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.