SAN ANTONIO, TX —
OSHA Inspection: B.B.T. INDUSTRIAL ENGINE SERVICE, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of B.B.T. INDUSTRIAL ENGINE SERVICE, INC. in 5858 BICENTENNIAL ST., SAN ANTONIO, TX 78219 (NAICS 332710). OSHA activity number 340443050.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- B.B.T. INDUSTRIAL ENGINE SERVICE, INC.
- Site address
- 5858 BICENTENNIAL ST.
- City
- SAN ANTONIO
- State
- TX
- ZIP
- 78219
- Mailing
- 5858 BICENTENNIAL ST., SAN ANTONIO, TX 78219
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332710
- Employees
- 13
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.212 A03 II
- Issued
- May 28, 2015
- Abate by
- Jun 7, 2015
- Penalty
- Initial $1,600 · Current $960 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): Machine Shop Area: On or about March 5 2015, employees were exposed to caught-in and or stuck-by hazards while operating a Serdi manual mill (Type: 100 Serial: 1408) with a rotating blade to cut and fabricate metal parts without a guard in place.
Recent events (2)
- — I (S) $960
- — Z (S) $1600
1910.242 B
- Issued
- May 28, 2015
- Abate by
- Jun 7, 2015
- Penalty
- Initial $1,600 · Current $960 Reduced
General-duty citation text
29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i.: Machine Shop, West wall: On or about March 5, 2015, and at times prior thereto, an employee was exposed to a struck-by and/or embolism hazard while using a blow off tool attached to compressed air that was not reduced to less than 30 P.S.I. to clean off a machine.
Recent events (2)
- — I (S) $960
- — Z (S) $1600
1910.305 G01 IV B
- Issued
- May 28, 2015
- Abate by
- Jun 3, 2015
- Penalty
- Initial $2,000 · Current $1,200 Reduced
General-duty citation text
29 CFR 1910.305(g)(1)(iv)(B): Flexible cords and cables may not be used where run through holes in walls, ceilings or floors: Machine shop, east wall: On or about March 5, 2015, and times prior thereto, employees were exposed to an electrical shock hazards of 110 volt/ 20 amperes while using a parts washer that was electrically connected by an extension cord that ran through a hole in a wall.
Recent events (2)
- — I (S) $1200
- — Z (S) $2000
1910.305 G02 III
- Issued
- May 28, 2015
- Abate by
- Jun 7, 2015
- Penalty
- Initial $2,000 · Current $1,200 Reduced
General-duty citation text
29 CFR 1910.305(g)(2)(iii): Flexible cords and cables were not connected to devices and fittings so that strain relief was provided that would prevent pull from being directly transmitted to joints or terminal screws: Machine Shop, West side, Magnaflux Machine (Model: DRA-100 Serial: 731726): On or about March 5, 2015, and at times prior thereto, employees were exposed to electrical shock hazards up to 240 Volt/ 550 Amperes of current while energizing parts on the machine to detect structural cracks and having the electrical insulation damaged with exposed wiring.
Recent events (2)
- — I (S) $1200
- — Z (S) $2000
More inspections at B.B.T. Industrial Engine Service, INC.
View B.B.T. Industrial Engine Service, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332710)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340443050.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.