PASCAGOULA, MS —
OSHA Inspection: PEMCO-NAVAL ENGINEERING WORKS, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of PEMCO-NAVAL ENGINEERING WORKS, INC. in 3614 FREDERIC STREET, PASCAGOULA, MS 39567 (NAICS 332312). OSHA activity number 340443886.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- PEMCO-NAVAL ENGINEERING WORKS, INC.
- Site address
- 3614 FREDERIC STREET
- City
- PASCAGOULA
- State
- MS
- ZIP
- 39567
- Mailing
- 3614 FREDERIC STREET, PASCAGOULA, MS 39567
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332312
- Employees
- 30
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.106 E06 II
- Issued
- Jul 2, 2015
- Abate by
- Jul 13, 2015
- Penalty
- Initial $2,975 · Current $1,785 Reduced
General-duty citation text
29 CFR 1910.106(e)(6)(ii): Category 1 or 2 flammable liquids, or Category 3 flammable liquids with a flashpoint below 100 degree F (37.8 degree C), were dispensed into containers without the containers being electrically interconnected. (a) In the solvent storage area - On or about March 3, 2015, acetone from a 55 gallon container was dispensed into a gallon container without being bonded together and grounded.
Recent events (2)
- — I (S) $1785
- — Z (S) $2975
1910.147 C04 I
- Issued
- Jul 2, 2015
- Abate by
- Jul 27, 2015
- Penalty
- Initial $2,380 · Current $1,428 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: (a) Throughout the facility - On or about March 3, 2015, the employer had not developed any specific lockout/tagout procedures for required equipment such as but not limited to mechanical power presses, air compressors, welders, drill presses, overhead cranes, and etc.
Recent events (2)
- — I (S) $1428
- — Z (S) $2380
1910.147 C06 I
- Issued
- Jul 2, 2015
- Abate by
- Jul 27, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed: (a) Throughout the facility - On or about March 3, 2015, the employer had not conducted any periodic inspection of the energy control procedures at least annually on required equipment such as but not limited to mechanical power presses, air compressors, welders, drill presses, overhead cranes, and etc.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.242 B
- Issued
- Jul 2, 2015
- Abate by
- Jul 13, 2015
- Penalty
- Initial $2,380 · Current $1,428 Reduced
General-duty citation text
29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 psi : (a) Cleaning station - On or about March 3, 2015, the air nozzle used for cleaning had compressed air greater than 100 psi at the nozzle. (b) Machine shop - On or about March 3, 2015, the air nozzle at #2 Webb lathe used for cleaning had compressed air greater than 100 psi at the nozzle.
Recent events (2)
- — I (S) $1428
- — Z (S) $2380
1910.303 G02 I
- Issued
- Jul 2, 2015
- Abate by
- Jul 13, 2015
- Penalty
- Initial $2,975 · Current $1,785 Reduced
General-duty citation text
29 CFR 1910.303(g)(2)(i): Live parts of electric equipment operating at 50 volts or more were not guarded against accidental contact by approved cabinets of other forms of approved enclosures, or other means listed under this provision: (a) East wall of the high bay - On or about March 3, 2015, the 220 volt circuit breaker panel had 3 open slots. Slot numbers 1, 3, 9, and 11.
Recent events (2)
- — I (S) $1785
- — Z (S) $2975
1910.37 B02
- Issued
- Jul 2, 2015
- Abate by
- Jul 20, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.37(b)(2): Each exit was not clearly visible and marked by a sign reading "Exit": (a) Throughout the facility - On or about March 3, 2015, there were three (3) exit doors that were not marked "EXIT".
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.305 G02 III
- Issued
- Jul 2, 2015
- Abate by
- Jul 20, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(g)(2)(iii): Flexible cords were not connected to devices and fittings so that tension would not be transmitted to joints or terminal screws: (a) In the High Bay - On or about March 3, 2015, a welding machine had a defective strain relief where the electric power cord enters the 480 volt 3 phase disconnect on the wall.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Pemco-Naval Engineering Works, INC.
View Pemco-Naval Engineering Works, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332312)
More inspections in MS
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340443886.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.