ATLANTA, GA —
OSHA Inspection: SOUTH FULTON MACHINE WORKS, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of SOUTH FULTON MACHINE WORKS, INC. in 5515 HUNTER ROAD, ATLANTA, GA 30349 (NAICS 332710). OSHA activity number 340444769.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SOUTH FULTON MACHINE WORKS, INC.
- Site address
- 5515 HUNTER ROAD
- City
- ATLANTA
- State
- GA
- ZIP
- 30349
- Mailing
- 5515 HUNTER ROAD, ATLANTA, GA 30349
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332710
- Employees
- 10
- Ownership type
- A
Citations
3 citations on file for this inspection.
1910.36 D01
- Issued
- Jun 22, 2015
- Abate by
- Jul 17, 2015
- Penalty
- Initial $1,200 · Current $0 Reduced
General-duty citation text
29 CFR 1910.36(d)(1): Employee(s) were not able to open an exit route door from the inside at all times without keys, tools, or special knowledge: (a) 5515 Hunter Road, College Park, GA 30339, Shop Area: Employees were exposed to entrapment hazards. The rear door was locked from the inside and employees were unable to exit in the event of a fire.
Recent events (2)
- — I (S) $0
- — Z (S) $1200
1910.212 A01
- Issued
- Jun 22, 2015
- Abate by
- Jul 17, 2015
- Penalty
- Initial $5,600 · Current $0 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: South Fulton Machine Works, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1910.212(a)(1) in OSHA inspection number 419184, citation 1, item number 3 and was affirmed as a final order on October 11, 2012 with respect to a work place located at 5515 Hunter Road, College Park, Georgia 30349. (a) 5515 Hunter Road, College Park, GA 30339, Shop Area: Employees were exposed to rotating parts of the Horizontal Lathe, LeBlond, amputation hazards. (b) 5515 Hunter Road, College Park, GA 30339, Shop Area: Employees were exposed to rotating parts of from Horizontal Lathe, DaeJung 560, amputation hazards. (c) 5515 Hunter Road, College Park, GA 30339, Shop Area: Employees were exposed to rotating parts of the Horizontal Lathe, ACRA, amputation hazards. (d) 5515 Hunter Road, College Park, GA 30339, Shop Area: Employees were exposed to rotating parts of the Drill press, Wilson VSG Twenty, amputation hazards. (e) 5515 Hunter Road, College Park, GA 30339, Shop Area: Employees were exposed to rotating parts of the Horizontal Lathe, Monarch (serial no 33210), amputation hazards. (f) 5515 Hunter Road, College Park, GA 30339, Shop Area: Employees were exposed to rotating parts of the Horizontal Lathe, 30 feet Engine Lathe, amputation hazards. (g) 5515 Hunter Road, College Park, GA 30339, Shop Area: Employees were exposed to rotating parts of from Horizontal Lathe, DaeJung 400, amputation hazards.
Recent events (2)
- — I (R) $0
- — Z (R) $5600
1910.212 A03 II
- Issued
- Jun 22, 2015
- Abate by
- Jul 17, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): (a) 5515 Hunter Road, College Park, GA, Shop Area: Employees were exposed to an amputation hazard at the point of operation of the Summit Radial arm milling machine.
Recent events (2)
- — I (R) $0
- — Z (R) $0
More inspections at South Fulton Machine Works, INC.
View South Fulton Machine Works, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332710)
More inspections in GA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340444769.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.