COLMAR, PA —
OSHA Inspection: DORMAN PRODUCTS, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of DORMAN PRODUCTS, INC. in 3400 E. WALNUT ST., COLMAR, PA 18915 (NAICS 336399). OSHA activity number 340460930.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- DORMAN PRODUCTS, INC.
- Site address
- 3400 E. WALNUT ST.
- City
- COLMAR
- State
- PA
- ZIP
- 18915
- Mailing
- 3400 E. WALNUT ST., COLMAR, PA 18915
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 336399
- Employees
- 700
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.147 C04 I
- Issued
- Apr 21, 2015
- Penalty
- Initial $3,400 · Current $2,380 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: (a) Production Workshop Area: On or about March 10, 2015, employees performed machine maintenance actions which require the removal of guards on machinery with multiple energy sources, including an Alloyd Blister Machine and Big Sky Machine, but the company had not developed written lockout/tag out procedures to address these energy sources, exposing the employees to injury.
Recent events (2)
- — I (S) $2380
- — Z (S) $3400
1910.219 D01
- Issued
- Apr 21, 2015
- Penalty
- Initial $2,890 · Current $2,023 Reduced
General-duty citation text
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): (a) Production Work Shop Area, Engineer Lab/Shop: On or about March 10, 2015, an employee used a Jet Knee Mill machine that had an unguarded belt and pulley that was less than 7 feet above the working surface, exposing employees to potential injuries.
Recent events (2)
- — I (S) $2023
- — Z (S) $2890
1910.219 E01 I
- Issued
- Apr 21, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(e)(1)(i): Horizontal belts which had both runs seven feet or less from the floor level were not guarded with a guard that extended to at least fifteen inches above the belt: (a) Production Work Shop Area, Engineer Lab/Shop: On or about March 10, 2015, an employee used a Jet Knee Mill machine that had an unguarded horizontal belt that was less than 7 feet above the working surface, exposing employees to potential injuries.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.303 B01 II
- Issued
- Apr 21, 2015
- Penalty
- Initial $2,890 · Current $2,023 Reduced
General-duty citation text
29 CFR 1910.303(b)(1)(ii): Electrical equipment was not free from recognized hazards, based on the mechanical strength and durability, including, for parts designed to enclose and protect other equipment, the adequacy of the protection thus provided: (a) Production Work Shop Area, Engineer Lab/Shop: On or about March 10, 2015, an employee used a Jet Knee Mill machine with a loosely connected junction box that was not free from recognized hazards, exposing employees to shock/electrical hazard.
Recent events (2)
- — I (S) $2023
- — Z (S) $2890
1910.1200 F06
- Issued
- Apr 21, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(f)(6): The employer used written materials, such as signs, placards, process sheets, or batch tickets in lieu of affixing labels to individual stationary process containers that failed to identify the container(s) to which they were applicable and did not convey the information required by 29 CFR 1910.1200(f)(5): (a) Production Work Shop Area, Engineer Lab/Shop: On or about March 10, 2015, employees used a gallon container of Kool Mist Formula 77 coolant to service parts and equipment, but the container was not labeled, tagged or marked to indicate its contents, exposing employees to safety and or health hazards.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Dorman Products, INC.
View Dorman Products, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 336399)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340460930.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.