HARRISBURG, PA —
OSHA Inspection: DORMAN PRODUCTS, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of DORMAN PRODUCTS, INC. in 1300 NORTH CAMERON STREET, HARRISBURG, PA 17103 (NAICS 332613). OSHA activity number 346477631.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- DORMAN PRODUCTS, INC.
- Site address
- 1300 NORTH CAMERON STREET
- City
- HARRISBURG
- State
- PA
- ZIP
- 17103
- Mailing
- 490 RAILROAD AVENUE, SHIREMANSTOWN, PA 17011
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332613
- Employees
- 130
- Ownership type
- A
Citations
6 citations on file for this inspection.
5(a)(1)
- Issued
- Jul 26, 2023
- Abate by
- Aug 15, 2024
- Penalty
- Initial $6,696 · Current $15,625
General-duty citation text
OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees. Employees were exposed to stuck by hazards. a. The Yard - On or about February 2, 2023, the trey/stacking frames were not maintained in safe condition as the decking had been rusted through exposing employees to a struckby hazard. b. The Yard - On or about February 2, 2023, the trey/stacking frames were not properly seated in the cups creating an unstable load putting stress on the other frames that exposed employees to a struck by hazard. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (S) $15625
- — Z (S) $6696
5(a)(1)
- Issued
- Jul 26, 2023
- Abate by
- Aug 15, 2024
- Penalty
- Initial $11,162 · Current $15,625
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that caused or were likely to cause death or serious physical harm in that employees were exposed to combustible dust explosion, deflagration, or other fire hazards while working at or near dust collection system which were not adequately designed to prevent or minimize employee exposure in the event of a deflagraion or other uncontrolled fire event: a. Shotpeen Dust Collector - On or about February 2, 2023, employees were exposed to fire and explosion hazards from the accumulation of fugitive dust with a kst of 13.71 bar*meter/sec in the shotpeen dust collection area was not grounded and was installed inside the building. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (S) $15625
- — Z (S) $11162
1910.22 A01
- Issued
- Jul 26, 2023
- Abate by
- Aug 10, 2023
- Penalty
- Initial $11,162 · Current $0 Reduced
General-duty citation text
29 CFR 1910.22(a)(1): The employer did not ensure that all places of employment, passageways, storerooms, service rooms, and walking-working surfaces are kept in a clean, orderly, and sanitary condition. a. Doorway - On or about February 2, 2023, employees were exposed to slips and falls due to oil being spilled on the floor from the transfer drums that had not been cleaned up. b. ShotPeen - On or about February 2, 2023, employees were exposed to slips and falls due to shotpeen balls accumulated on the floor near the conveyors and the blast booth. c. Shotpeen Dust Collector - On or about February 2, 2023, employees were exposed to fire and explosion hazards from the accumulation of fugitive dust with a kst of 13.71 bar*meter/sec in the shotpeen dust collection area. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (S) $0
- — Z (S) $11162
1910.307 C
- Issued
- Jul 26, 2023
- Abate by
- Aug 15, 2024
- Penalty
- Initial $11,162 · Current $0 Reduced
General-duty citation text
29 CFR 1910.307(c): Equipment, wiring methods, and installations of equipment in hazardous (classified) locations were not intrinsically safe, approved for the hazardous (classified) location, or safe for the hazardous (classified) location: a. ShotPeen dust collection - On or about February 2, 2023, the employer installed electrical equipment not rated for class II environments in that area where the dust collection system is housed, exposing employees to deflagration hazards. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (O) $0
- — Z (S) $11162
1910.1200 H01
- Issued
- Jul 26, 2023
- Abate by
- Aug 9, 2023
- Penalty
- Initial $11,162 · Current $0 Reduced
General-duty citation text
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area: a. ShotPeen - On or about February 2, 2023, employees working around combustible dust generating equipment and collection systems were not trained on the hazards of combustible dust or the measures to limit potential deflagration hazards. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (S) $0
- — Z (S) $11162
1910.106 E02 II
- Issued
- Jul 26, 2023
- Abate by
- Aug 9, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.106(e)(2)(ii): Flammable or combustible liquids were not stored in tanks or closed containers: a. The door - On or about February 2, 2023, the employer had a mostly full 5-gallon blue kerosene safety can that was not closed and sealed to prevent spillage or off gassing while not in use, exposing employees to a fire hazard. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Dorman Products, INC.
View Dorman Products, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332613)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346477631.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.