Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: U.S. FORMLINER INC.

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of U.S. FORMLINER INC. in 370 COMMERCE BLVD., ATHENS, GA 30606 (NAICS 327390). OSHA activity number 340465202.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch U.S. Formliner INC. — free Get an email when a new federal OSHA severe-injury report for U.S. Formliner INC. is published. One employer, no account, unsubscribe in one click.
Establishment
U.S. FORMLINER INC.
Site address
370 COMMERCE BLVD.
City
ATHENS
State
GA
ZIP
30606
Mailing
370 COMMERCE BLVD., ATHENS, GA 30606
Inspection type
Complaint (B)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
327390
Employees
10
Ownership type
A

5 citations on file for this inspection.

1910.157 C01

Deleted Serious Gravity 5 3 instances 3 exposed
Issued
Apr 21, 2015
Penalty
Initial $1,360 · Current $0 Reduced
29 CFR 1910.157(c)(1): Portable fire extinguishers were not mounted, located and identified so that they were readily accessible without subjecting the employees to injuries:  a)  On or about March 16, 2015 and at times prior to, a portable fire extinguisher was not mounted and identified in the workshop so that it was readily accessible to employees, exposing employees to possible injuries in case of fire emergency.
Recent events (2)
  • — I (S) $0
  • — Z (S) $1360

1910.157 C04

Deleted Serious Gravity 5 2 instances 3 exposed
Issued
Apr 21, 2015
Penalty
Initial $0 · Current $0
29 CFR 1910.157(c)(4): The employer did not assure that portable fire extinguishers were maintained in a fully charged and operable condition and kept in their designated areas at all times except during use:  a)  On or about March 16, 2015 and at times prior to, portable fire extinguishers were not maintained in a fully charged and operable condition in the workshop, exposing employees to possible injuries in case of fire emergency.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.213 D01

Serious Gravity 10 1 instance 1 exposed
Issued
Apr 21, 2015
Penalty
Initial $2,800 · Current $1,400 Reduced
29 CFR 1910.213(d)(1): Circular handfed crosscut table saw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut:  (a)  In the workshop, on or about March 16, 2015, and at times prior to, employees cut wood and with unguarded Delta table saw, exposing employees to amputation and laceration hazards.
Recent events (2)
  • — I (S) $1400
  • — Z (S) $2800

1910.215 B09

Serious Gravity 5 1 instance 1 exposed
Issued
Apr 21, 2015
Penalty
Initial $1,700 · Current $850 Reduced
29 CFR 1910.215(b)(9): 29 CFR 1910.215(b)(9):  The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch.  (a)  In the workshop, on or about March 16, 2015, and at times prior to, an employee used 6" Dewalt grinder to with an opening of 3/8 of an inch to clean and sharpen small hand tools, exposing the employee to amputation and laceration hazards.
Recent events (2)
  • — I (S) $850
  • — Z (S) $1700

1910.1200 H03 IV

Deleted Serious Gravity 1 1 instance 1 exposed
Issued
Apr 21, 2015
Abate by
May 15, 2015
Penalty
Initial $1,200 · Current $0 Reduced
29 CFR 1910.1200(h)(3)(iv): The employer did not train employees regarding the new label elements and safety data sheets format.  (a)  In the workshop, on or about February 26, 2015, and at times prior to, employees who used hazardous chemicals including but not limited to glue Wilsonart 950, stripping wax and mold wax were not trained regarding the new label elements and safety data sheets format by December 1, 2013.
Recent events (2)
  • — I (S) $0
  • — Z (S) $1200

View U.S. Formliner INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340465202.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.