OSHA Inspection: DEFENSE COMMISSARY AGENCY

Issued

Mar 26, 2015

Abate by

Apr 23, 2015

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.22(a)(2): Where wet processes were used, drainage was not maintained, and false floors, platforms, mats, or other dry standing places were not provided when practicable.  Meat cutting area; on or about 24 March 2015 and times prior thereto; a floor drain adjacent to meat grinding machinery was clogged. This condition resulted in water overflowing onto an area that has small meats products on the floor. This condition exposed employees to a fall hazard.

Issued

Mar 26, 2015

Abate by

Apr 23, 2015

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.303(b)(7)(iv): There shall be no damaged parts that may adversely affect safe operation or mechanical strength of the equipment, such as parts that are broken, bent, cut, or deteriorated by corrosion, chemical action, or overheating.  Old freezer area; on or about 24 March 2015 and times prior thereto; an electrical outlet was damaged. The conduit was separated from the outlet exposing the wires. This condition exposed employees to an electrical shock and electrical burn hazards.

Issued

Mar 26, 2015

Abate by

Apr 23, 2015

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.305(b)(2)(i): Each outlet box in completed installations did not have a cover, faceplate, or fixture canopy.  Building 724, office area; on or about 24 March 2015 and times prior thereto; and electrical outlet, in the office area was missing a faceplate. This condition exposed employees to electrical shock hazards.

Issued

Mar 26, 2015

Abate by

Apr 23, 2015

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.334(a)(2)(i): Portable cord and plug connected equipment and flexible cord sets (extension cords) were not visually inspected before use on any shift for external defects (such as loose parts, deformed and missing pins, or damage to outer jacket or insulation) and for evidence of possible internal damage (such as pinched or crushed outer jacket).  Meat processing area; on or about 24 March 2015 and times prior thereto; three instances were noted where the electrical power cords were damaged:       a. Meat wrapping area; a 120 volt Hobart brand, Commercial Food Preparing Machine (meat slicer), Model 2912, Serial number 56-1312-183, had damage to the protective outer jacket on the power cord.        b. Meat grinding area; a Hercules Foot Switch, Cat No 531-SWH, serial number unknown; had damage to the protective outer jacket on the power cord.  Foot switch is used to operate meat grinder.         c. Meat grinding area; a 200V Hollymatic GMG 180A, meat grinder, Serial number 6428 5411, had damage to the protective outer jacket on the power cord.   This condition exposed employees to an electrical shock and electrical burn hazards.