VINELAND, NJ —
OSHA Inspection: PAUL J. GILLESPIE INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of PAUL J. GILLESPIE INC. in 2565 BRUNETTA DRIVE, VINELAND, NJ 08360 (NAICS 423320). OSHA activity number 340492602.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- PAUL J. GILLESPIE INC.
- Site address
- 2565 BRUNETTA DRIVE
- City
- VINELAND
- State
- NJ
- ZIP
- 08360
- Mailing
- 2565 BRUNETTA DRIVE, VINELAND, NJ 08360
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 423320
- Employees
- 13
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.179 J02 III
- Issued
- Jul 16, 2015
- Abate by
- Sep 14, 2015
- Penalty
- Initial $2,000 · Current $1,500 Reduced
General-duty citation text
29 CFR 1910.179(j)(2)(iii): Monthly inspections of hooks, with signed reports, were not performed: a) Paul J. Gillespie Inc. - Shop area: The employer did not conduct a monthly inspection of the hook on the ACECO 10 ton crane #1604, occurred on or about 03/26/2015.
Recent events (2)
- — I (S) $1500
- — Z (S) $2000
1910.179 J02 IV
- Issued
- Jul 16, 2015
- Abate by
- Sep 14, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.179(j)(2)(iv): Monthly inspections of hoist chains, with a certification record which includes the date of inspection, the signature of the person who performed the inspection and an identifier of the chain which was inspected, were not performed: a) Paul J. Gillespie Inc. - Shop area: The employer did not conduct a monthly inspection of the hoist chains on the ACECO 10 ton crane #1604, occurred on or about 03/26/2015.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.179 J03
- Issued
- Jul 16, 2015
- Abate by
- Dec 3, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.179(j)(3): A complete periodic inspection of crane(s) had not been conducted in the past 12 months: a) Paul J. Gillespie Inc. - Shop area: The employer did not conduct a periodic inspection on the ACECO 10 ton crane #1604, occurred on or about 03/26/2015.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.334 A02 I
- Issued
- Jul 16, 2015
- Abate by
- Sep 14, 2015
- Penalty
- Initial $1,200 · Current $900 Reduced
General-duty citation text
29 CFR 1910.334(a)(2)(i): Portable cord and plug connected equipment and flexible cord sets (extension cords) were not visually inspected before use on any shift for external defects (such as loose parts, deformed and missing pins, or damage to outer jacket or insulation) and for evidence of possible internal damage (such as pinched or crushed outer jacket): a) Paul J. Gillespie Inc. - Shop area: The insulation of the cord of a Lincoln Arc Welder Machine Model #AC-225-S, Serial # 6304-018 was damaged and was not inspected prior to use, observed on or about 03/26/2015. b) Paul J. Gillespie Inc. - shop area: An extension cord used to connect the Reddy Heater Pro 165 (165,000 BTU) had a damaged strain relief and was not inspected prior to use, observed on or about 03/26/2015. c) Paul J. Gillespie Inc. - Shop area: The cord of a Lincoln arc welder machine Model #AC-225-S, Serial # 6304-018 had a damaged strain relief and was not inspected prior to use, observed on or about 03/26/2015.
Recent events (2)
- — I (S) $900
- — Z (S) $1200
1904.29 A
- Issued
- Jul 16, 2015
- Abate by
- Sep 14, 2015
- Penalty
- Initial $400 · Current $300 Reduced
General-duty citation text
29 CFR 1904.29(a): The employer did not use an OSHA 300, 301 and 300A Forms or equivalent: a) Paul J. Gillespie Inc., Vineland NJ 08360: On or about 03/26/2015 the employer did not have a form used for recording injuries and illnesses equivalent to the OSHA 300 and 301 forms for the calendar year 2015.
Recent events (2)
- — I (O) $300
- — Z (O) $400
1910.178 L04 III
- Issued
- Jul 16, 2015
- Abate by
- Sep 14, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance was not being conducted at least once every three years: a) Gillespie Industries - : Forklift operators were not evaluated every three years in their ability to operate the powered industrial truck safely. Occurred on or about 03/26/2015.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Paul J. Gillespie INC.
View Paul J. Gillespie INC.'s full OSHA safety record →
More inspections in this industry (NAICS 423320)
More inspections in NJ
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340492602.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.