Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: HOUSEHOLD UTILITIES, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of HOUSEHOLD UTILITIES, INC. in 10 E PARK AVENUE, KIEL, WI 53042 (NAICS 332322). OSHA activity number 340525245.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Household Utilities, INC. — free Get an email when a new federal OSHA severe-injury report for Household Utilities, INC. is published. One employer, no account, unsubscribe in one click.
Site address
10 E PARK AVENUE
City
KIEL
State
WI
ZIP
53042
Mailing
10 E PARK AVENUE, KIEL, WI 53042
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332322
Employees
95
Ownership type
A

3 citations on file for this inspection.

1910.212 A01

Serious Gravity 5 5 instances 8 exposed
Issued
Apr 17, 2015
Abate by
May 21, 2016
Penalty
Initial $2,975 · Current $1,785 Reduced
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:    a)    On or about 4/8/2015, The Cell # 97 MAZAK Laser cutter did not have adequate barrier guarding to prevent employee exposure to the robotic material loader.The gate in the barrier guard fencing was not locked or equipped with a control reliable safety interlock.    b)    On or about 4/8/2015, The Cell # 93 MAZAK Laser cutter did not have adequate barrier guarding to prevent employee exposure to the robotic material loader.  The gate in the barrier guard fencing was not locked or equipped with a control reliable safety interlock.    c)    On or about 4/8/2015, The Cell # 91 MAZAK Laser cutter did not have adequate barrier guarding to prevent employee exposure to the robotic material loader. The guardrail around the machine did not adequately prevent entry into the hazardous area.    d)    On or about 4/8/2015, The company had a baler in the paint area of the plant that had a safety interlock that was not operational. This allowed the baler to cycle with the guard gate open.    e)    On or about 4/8/2015, The company had STRIPIT machines that had guard doors which were not interlocked. This allowed the machines to operate in the run mode with the door up in the open position.
Recent events (2)
  • — I (S) $1785
  • — Z (S) $2975

1910.1200 F06 II

Serious Gravity 1 8 instances 6 exposed
Issued
Apr 17, 2015
Abate by
May 1, 2015
Penalty
Initial $1,785 · Current $1,071 Reduced
29 CFR 1910.1200(f)(6)(ii): Except as provided in 29 CFR 1910.1200(f)(7) and 29 CFR 1910.1200(f)(8), the employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged or marked with the product identifier and words, pictures, symbols, or combination thereof, which provide at least general information regarding the hazards of the chemicals and which, in conjunction with the other information immediately available to employees under the hazard communication program, would provide employees with the specific information regarding the physical and health hazards of the hazardous chemical:    a)    On or about 4/8/2015, The company did not ensure that each bottle, can, barrel, or tank was marked with the container contents and the hazards of the chemicals.
Recent events (2)
  • — I (S) $1071
  • — Z (S) $1785

1910.303 B02

Other-than-serious 2 instances 4 exposed
Issued
Apr 17, 2015
Abate by
May 22, 2015
Penalty
Initial $0 · Current $0
29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling:  a)    On or about 4/8/2015, The company was using multi-tap electrical strips in combination and plugged into extension cords at the #97 Huddle Board.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View Household Utilities, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340525245.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.