PALATINE, IL —
OSHA Inspection: H.B. FULLER CONSTRUCTION PRODUCTS, INC.
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of H.B. FULLER CONSTRUCTION PRODUCTS, INC. in 315 S. HICKS RD., PALATINE, IL 60067 (NAICS 325520). OSHA activity number 340557719.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- H.B. FULLER CONSTRUCTION PRODUCTS, INC.
- Site address
- 315 S. HICKS RD.
- City
- PALATINE
- State
- IL
- ZIP
- 60067
- Mailing
- 315 S. HICKS RD., PALATINE, IL 60067
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 325520
- Employees
- 50
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.134 E01
- Issued
- Sep 28, 2015
- Abate by
- Oct 23, 2015
- Penalty
- Initial $3,000 · Current $3,000
90109130
General-duty citation text
29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace: a) H.B. Fuller Construction Products, Inc. in Palatine, IL, did not ensure that respiratory medical evaluations were provided to workers required to wear respiratory protection, such as the 3M 8210 & Moldex 2700 N95-rated particulate respirators, in the dry powder processing department. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- — I (S) $3000
- — Z (S) $3000
1910.134 F02
- Issued
- Sep 28, 2015
- Penalty
- Initial $3,000 · Current $0 Reduced
90109130
General-duty citation text
29 CFR 1910.134(f)(2): Employee(s) using a tight-fitting facepiece respirator were not annually fit tested: a) H.B. Fuller Construction Products, Inc. in Palatine IL, did not ensure that fit tests were provided on an annual basis to workers required to wear respiratory protection, such as 3M 8210 & Moldex 2700 N95-rated particulate respirators, in the dry powder processing department. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- — I (S) $0
- — Z (S) $3000
1910.1200 H03 II
- Issued
- Sep 28, 2015
- Abate by
- Nov 16, 2015
- Penalty
- Initial $3,000 · Current $0 Reduced
90109130
General-duty citation text
29 CFR 1910.1200(h)(3)(ii): Employee hazard communicataion training did not include the physical and health hazards of the chemicals in the work area: a) H.B. Fuller Construction Products, Inc. in Palatine, IL, did not provide workers in the dry powder processing department information and training on the physical or health hazards of the powders in the dry powder processing department, such as ignition and combustibility hazards of powders, and that silica is a carcinogen and may cause silicosis. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- — I (S) $0
- — Z (S) $3000
1910.134 M02 I C
- Issued
- Sep 28, 2015
- Abate by
- Oct 30, 2015
- Penalty
- Initial $0 · Current $0
90109130
General-duty citation text
29 CFR 1910.134(m)(2)(i)(C): The employer did not establish a record of the qualitative and quantitative fit tests administered to an employee which included the specific make, model, style and size of respirator tested: a) H.B. Fuller Construction Products, Inc., Palatine, IL, did not ensure that the fit test records for their workers and contract employees working in the dry powder processing department specified the make (Brand), model number, style and size of the respirator that each employee was fit-tested with. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at H.B. Fuller Construction Products, INC.
View H.B. Fuller Construction Products, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 325520)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340557719.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.