LILBURN, GA —
OSHA Inspection: QUALITY POWDER COATING, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of QUALITY POWDER COATING, INC. in 200 BUSINESS DRIVE SW, LILBURN, GA 30047 (NAICS 325510). OSHA activity number 340562131.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- QUALITY POWDER COATING, INC.
- Site address
- 200 BUSINESS DRIVE SW
- City
- LILBURN
- State
- GA
- ZIP
- 30047
- Mailing
- 200 BUSINESS DRIVE, LILBURN, GA 30047
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 325510
- Employees
- 8
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.36 D01
- Issued
- Jul 10, 2015
- Abate by
- Aug 5, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.36(d)(1): Employee(s) were not able to open an exit route door from the inside at all times without keys, tools, or special knowledge: On or about 4/16/15 at 200 Business Drive in Lilburn, GA: Employees in the office, break, and restroom area in the facility were exposed to an entrapment hazard with exit door in the area locked.
Recent events (1)
- — Z (S) $0
1910.37 A04
- Issued
- Jul 10, 2015
- Abate by
- Aug 5, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.37(a)(4): Safeguard(s) designed to protect employees during an emergency (e.g., sprinkler systems, alarm systems, fire doors, exit lighting), were not in proper working order at all times: On or about 4/16/15 at 200 Business Drive in Lilburn, GA: The emergency exit lights over the exit doors in the facility were not operating properly to provide the employees lighted access to exit the building safely. 1. Emergency exit light over the exit door in the production area. 2. Emergency exit lights over the exit door in the office area.
Recent events (1)
- — Z (S) $0
1910.133 A01
- Issued
- Jul 10, 2015
- Abate by
- Jul 29, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.133(a)(1): Protective eye equipment was not required where there was a reasonable injury that could be prevented by such equipment. On or about 4/16/2015 at 200 Business Drive in Lilburn, GA: Employee was exposed to a flying metal hazards while operating a grinder on metal material without wearing eye protection.
Recent events (1)
- — Z (S) $0
1910.157 E03
- Issued
- Jul 10, 2015
- Abate by
- Aug 5, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.157(e)(3): Portable fire extinguishers were not subjected to an annual maintenance check: Note: Applies to any extinguishers provided in the workplace. On or about 4/16/15 at 200 Business Drive in Lilburn, GA: An annual inspection of the portable fire extinguishers located throughout the office and warehouse areas of the facility had not been performed by the employer since February 2014 could be ineffective if needed in a fire emergency.
Recent events (1)
- — Z (S) $0
1910.242 B
- Issued
- Jul 10, 2015
- Abate by
- Aug 5, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i.: On or about 4/16/15 at 200 Business Drive in Lilburn, GA: Employees are exposed to a struck-by hazard while using compressed air at over 30 psi for cleaning purposes.
Recent events (1)
- — Z (S) $0
1910.178 L04 III
- Issued
- Jul 10, 2015
- Abate by
- Aug 5, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance was not being conducted at least once every three years: On or about 4/16/2015 at 200 Business Drive in Lilburn, GA: The employees operating the powered industrial truck in the facility daily to lift pallets and boxes of products last record of training and reevaluation not within the past three years.
Recent events (1)
- — Z (O) $0
More inspections at Quality Powder Coating, INC.
View Quality Powder Coating, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 325510)
More inspections in GA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340562131.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.