Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: QUALITY POWDER COATING, INC.

Complaint inspection · Health discipline

On , OSHA opened a complaint health inspection of QUALITY POWDER COATING, INC. in 200 BUSINESS DRIVE SW, LILBURN, GA 30047 (NAICS 332812). OSHA activity number 342209319.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Quality Powder Coating, INC. — free Get an email when a new federal OSHA severe-injury report for Quality Powder Coating, INC. is published. One employer, no account, unsubscribe in one click.
Site address
200 BUSINESS DRIVE SW
City
LILBURN
State
GA
ZIP
30047
Mailing
200 BUSINESS DRIVE SW, LILBURN, GA 30047
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332812
Employees
15
Ownership type
A

9 citations on file for this inspection.

1910.134 E01

Serious Gravity 1 1 instance 1 exposed
Issued
Jun 9, 2017
Abate by
Jul 27, 2017
Penalty
Initial $2,173 · Current $1,521 Reduced
29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace:     Quality Powder Coating, Inc., Lilburn, GA -  Employees were provided and required to use half mask respirator for protection against dust. A medical evaluation was not performed to determine an employee's ability to use a respirator, on or about 015/31/2017.  In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
  • — I (S) $1521.1
  • — Z (S) $2173

1910.134 K01

Serious Gravity 1 1 instance 1 exposed
Issued
Jun 9, 2017
Abate by
Jul 27, 2017
Penalty
Initial $0 · Current $0
29 CFR 1910.134(k)(1): The employer did not provide comprehensive, understandable training annually and/or more often if necessary:  Quality Powder Coating, Inc., Lilburn, GA - In the powder coating area, an employee was provided and required to use half mask, tight fitting respirators for protection against dust. Training on respirators was not conducted, on or about 05/31/2017.  In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.107 L02 I

Serious Gravity 5 1 instance 7 exposed
Issued
Jun 9, 2017
Abate by
Jul 27, 2017
Penalty
Initial $3,622 · Current $2,535 Reduced
29 CFR 1910.107(l)(2)(i): All non-deposited air-suspended powder was not safely removed via exhaust ducts to the powder recovery cyclone or receptacle:  Quality Powder Coating, Inc., Lilburn, GA - Employees were exposed to dust explosion hazard while powder coating outside of the assigned powder coating booths.  Powder coating dust was observed along ledges, beams, walls, floors, eye wash, etc., on or about 01/19/2017.   In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
  • — I (S) $2535.4
  • — Z (S) $3622

1910.107 L02 II

Serious Gravity 5 1 instance 7 exposed
Issued
Jun 9, 2017
Abate by
Jul 27, 2017
Penalty
Initial $0 · Current $0
29 CFR 1910.107(l)(2)(ii): Powder was released to the outside atmosphere:  Quality Powder Coating, Inc., Lilburn, GA - Employees were exposed to dust explosion hazard while powder coating outside of the assigned powder coating booths.  Powder coating dust was observed along ledges, beams, walls, floors, eye wash, etc., on or about 01/19/2017.   In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.107 L04 I

Serious Gravity 5 1 instance 7 exposed
Issued
Jun 9, 2017
Abate by
Jul 27, 2017
Penalty
Initial $0 · Current $0
29 CFR 1910.107(l)(4)(i): All areas were not kept free of the accumulation of powder coating dust:  Quality Powder Coating, Inc., Lilburn, GA - Employees were exposed to dust explosion hazard while powder coating outside of the assigned powder coating booths.  Powder coating dust was observed along ledges, beams, walls, floors, eye wash, etc., on or about 01/19/2017.   In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.151 C

Serious Gravity 1 1 instance 3 exposed
Issued
Jun 9, 2017
Abate by
Jul 27, 2017
Penalty
Initial $2,173 · Current $1,521 Reduced
29 CFR 1910.151(c): Where employees were exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body were not provided within the work area for immediate emergency use:   Quality Powder Coating, Inc., Lilburn, GA - Employees were using part cleaning chemicals, such as, but not limited to Houghton Prep (containing sodium hydroxide) for cleaning parts.  The emergency eye wash provided was not inspected monthly and was covered with powder coating dust, on or about 0/19/2017.   In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
  • — I (S) $1521.1
  • — Z (S) $2173

1910.178 O01

Serious Gravity 5 1 instance 2 exposed
Issued
Jun 9, 2017
Abate by
Jul 27, 2017
Penalty
Initial $2,897 · Current $2,028 Reduced
29 CFR 1910.178(o)(1): The employer did not ensure that only stable or safely arranged loads were handled:  Quality Powder Coating, Inc., Lilburn, GA - An employee was exposed to foot and leg injury when he was allowed to guide a cart, containing unsecured 16 to 20 feet long steel beams, while the cart and beams were pushed into a warehouse using the forks of a forklift and a rolling cart, on or about 01/19/17.
Recent events (2)
  • — I (S) $2027.9
  • — Z (S) $2897

1910.1200 F06

Serious Gravity 1 1 instance 2 exposed
Issued
Jun 9, 2017
Abate by
Jul 27, 2017
Penalty
Initial $2,173 · Current $1,521 Reduced
29 CFR 1910.1200(f)(6): The employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged or marked with the information specified under paragraphs (f)(6)(i) through (ii) of this section:  Quality Powder Coating, Inc., Lilburn, GA- In the washing area, the employer did not  label a storage tank with necessary product identifier and words, pictures, symbols or combination thereof. One of the tanks contained chemicals such as but not limited to, Houghton Prep containing sodium hydroxide on or about 01/19/17.
Recent events (2)
  • — I (S) $1521.1
  • — Z (S) $2173

1910.1200 G08

Serious Gravity 1 1 instance 7 exposed
Issued
Jun 9, 2017
Abate by
Jul 27, 2017
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(g)(8):   The employer did not maintain in the workplace copies of the required safety data sheets for each hazardous chemical, and did not ensure that they were readily accessible during each work  shift to employees when they were in their work area(s)  Quality Powder Coating, Inc., Lilburn, GA - Employees use hazardous materials such as but not limited to paints, paint thinners, WD 40, blasting agent, and propane. Safety Data Sheets were not maintained, on or about 01/19/2017.  In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

View Quality Powder Coating, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342209319.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.