Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: J & J WELDING AND STEEL FABRICATION OF FLORIDA, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of J & J WELDING AND STEEL FABRICATION OF FLORIDA, INC. in 15500 PANAMA CITY BEACH PARKWAY NORTH PIER PARK, PANAMA CITY BEACH, FL 32401 (NAICS 238120). OSHA activity number 340565001.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch J & J Welding and Steel Fabrication of Florida, INC. — free Get an email when a new federal OSHA severe-injury report for J & J Welding and Steel Fabrication of Florida, INC. is published. One employer, no account, unsubscribe in one click.
Site address
15500 PANAMA CITY BEACH PARKWAY NORTH PIER PARK
City
PANAMA CITY BEACH
State
FL
ZIP
32401
Mailing
364 RECKER HIGHWAY, AUBURNDALE, FL 33823
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238120
Employees
15
Ownership type
A

2 citations on file for this inspection.

1926.501 B01

Deleted Repeat Gravity 10 1 instance 2 exposed
Issued
Jun 4, 2015
Penalty
Initial $9,800 · Current $0 Reduced
29 CFR 1926.501(b)(1): Each employee on a walking/working surface with an unprotected side or edge which was 6 feet (1.8 m) or more above a lower level was not protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems:  a.  On or about April 17, 2015, on the southeast side of a new commercial construction building, two employees changing a battery on a welding machine, were not protected from a 24 feet 5 inch fall hazard by the use of a personal fall protection system.  J & J Welding and Steel Fabrication of Florida, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1926.760(a)(1), which was contained in OSHA inspection number 982541, citation number 01, item number 02 and was affirmed as a final order on September 8, 2014, with respect to a workplace located at 12905 U.S. Hwy 98, Inlet Beach, FL 32413.
Recent events (3)
  • — F (R) $0
  • — C (R) $9800
  • — Z (R) $9800

1926.760 A01

Repeat Gravity 10 1 instance 2 exposed
Issued
Jun 4, 2015
Penalty
Initial $9,800 · Current $6,000 Reduced
29 CFR 1926.760(a)(1): Each employee engaged in a steel erection activity who is on a walking/working surface with an unprotected side or edge more than 15 feet (4.6 m) above a lower level was not protected from fall hazards by guardrail systems, safety net systems, personal fall arrest systems, positioning device systems, or fall restraint systems.    a.  On or about April 17, 2015 on the southwest side of a low slop roof of a new construction building, two employees working on a leading edge were tacking metal decking were not protected from a 23 foot 7 inch fall hazard by the use of a personal fall protection system.    b.  On or about April 17, 2015 on the southeast side of a low slop roof of a new construction building, two employees working on a leading edge were tacking metal decking were not protected from a 23 foot 8 inch fall hazard by the use of a personal fall protection system.    J & J Welding and Steel Fabrication of Florida, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1926.760(a)(1), which was contained in OSHA inspection number 982541, citation number 01, item number 02 and was affirmed as a final order on September 8, 2014, with respect to a workplace located at 12905 U.S. Hwy 98, Inlet Beach, FL 32413.
Recent events (3)
  • — F (R) $6000
  • — C (R) $9800
  • — Z (R) $9800

View J & J Welding and Steel Fabrication of Florida, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340565001.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.